Overview
ETH Balance
0 ETH
ETH Value
$0.00More Info
Private Name Tags
ContractCreator
Multichain Info
1 address found via
Loading...
Loading
Contract Name:
PoolRecoveryHelper
Compiler Version
v0.7.1+commit.f4a555be
Optimization Enabled:
Yes with 9999 runs
Other Settings:
default evmVersion
Contract Source Code (Solidity Standard Json-Input format)
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;
import "@balancer-labs/v2-interfaces/contracts/pool-utils/IBasePoolFactory.sol";
import "@balancer-labs/v2-interfaces/contracts/pool-utils/IRateProviderPool.sol";
import "@balancer-labs/v2-interfaces/contracts/pool-utils/IRecoveryMode.sol";
import "@balancer-labs/v2-solidity-utils/contracts/helpers/SingletonAuthentication.sol";
import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/EnumerableSet.sol";
/**
* @dev This contract allows anyone to check a given Pool's rate providers and put the Pool into recovery mode
* if any are reverting on `getRate`. This allows LPs to exit promptly, and also helps off-chain mechanisms
* identify failed pools and prevent further traffic from being routed to them (since in this state swap operations
* would fail).
*/
contract PoolRecoveryHelper is SingletonAuthentication {
using EnumerableSet for EnumerableSet.AddressSet;
EnumerableSet.AddressSet private _factories;
constructor(IVault vault, address[] memory initialFactories) SingletonAuthentication(vault) {
for (uint256 i = 0; i < initialFactories.length; ++i) {
require(_factories.add(initialFactories[i]), "Duplicate initial factory");
}
}
/**
* @notice Adds a Pool Factory to the helper. Only Pools created from factories added via this function can be
* passed to `enableRecoveryMode()`.
*/
function addPoolFactory(address factory) external authenticate {
require(_factories.add(factory), "Duplicate factory");
}
/**
* @notice Removes a Pool Factory from the helper.
*/
function removePoolFactory(address factory) external authenticate {
require(_factories.remove(factory), "Non-existent factory");
}
/**
* @notice Returns the total number of Pool Factories.
*/
function getFactoryCount() external view returns (uint256) {
return _factories.length();
}
/**
* @notice Returns the address of a Pool Factory at an index between 0 and the return value of `getFactoryCount()`.
*/
function getFactoryAtIndex(uint256 index) external view returns (IBasePoolFactory) {
return IBasePoolFactory(_factories.at(index));
}
/**
* @notice Returns true if the Pool has been created from a known factory.
*/
function isPoolFromKnownFactory(address pool) public view returns (bool) {
uint256 totalFactories = _factories.length();
for (uint256 i = 0; i < totalFactories; ++i) {
IBasePoolFactory factory = IBasePoolFactory(_factories.unchecked_at(i));
if (factory.isPoolFromFactory(pool)) {
return true;
}
}
return false;
}
/**
* @notice Enables Recovery Mode in a Pool, provided some of its rate providers are failing (i.e. `getRate()`
* reverts).
*
* Pools that are in Recovery Mode can be exited by LPs via the special Recovery Mode Exit, which avoids any complex
* computations and does not call into any external contracts, which makes it a very dependable way to retrieve the
* underlying tokens.
*
* However, while Recovery Mode is enabled the Pool pays no protocol fees. Additionally, any protocol fees
* accrued before enabling Recovery Mode will be forfeited.
*
* The Pool must have been created via a known Pool Factory contract.
*/
function enableRecoveryMode(address pool) external {
// We require that the Pools come from known factories as a sanity check since this function is permissionless.
// This ensures we're actually calling legitimate Pools, and that they support both the IRateProviderPool and
// IRecoveryMode interfaces.
require(isPoolFromKnownFactory(pool), "Pool is not from known factory");
// The Pool will be placed in recovery mode if any of its rate providers reverts.
IRateProvider[] memory rateProviders = IRateProviderPool(pool).getRateProviders();
for (uint256 i = 0; i < rateProviders.length; ++i) {
if (rateProviders[i] != IRateProvider(0)) {
try rateProviders[i].getRate() {
// On success, we simply keep processing rate providers
continue;
} catch {
IRecoveryMode(pool).enableRecoveryMode();
return;
}
}
}
// If no rate providers revert, we then revert to both signal that calling this function performs no state
// changes, and to help prevent these accidental wasteful calls.
revert("Pool's rate providers do not revert");
}
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
import "../solidity-utils/helpers/IAuthentication.sol";
import "../vault/IVault.sol";
interface IAuthorizerAdaptor is IAuthentication {
/**
* @notice Returns the Balancer Vault
*/
function getVault() external view returns (IVault);
/**
* @notice Returns the Authorizer
*/
function getAuthorizer() external view returns (IAuthorizer);
/**
* @notice Performs an arbitrary function call on a target contract, provided the caller is authorized to do so.
* @param target - Address of the contract to be called
* @param data - Calldata to be sent to the target contract
* @return The bytes encoded return value from the performed function call
*/
function performAction(address target, bytes calldata data) external payable returns (bytes memory);
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
pragma experimental ABIEncoderV2;
import "../solidity-utils/helpers/IAuthentication.sol";
interface IBasePoolFactory is IAuthentication {
/**
* @dev Returns true if `pool` was created by this factory.
*/
function isPoolFromFactory(address pool) external view returns (bool);
/**
* @dev Check whether the derived factory has been disabled.
*/
function isDisabled() external view returns (bool);
/**
* @dev Disable the factory, preventing the creation of more pools. Already existing pools are unaffected.
* Once a factory is disabled, it cannot be re-enabled.
*/
function disable() external;
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
interface IRateProvider {
/**
* @dev Returns an 18 decimal fixed point number that is the exchange rate of the token to some other underlying
* token. The meaning of this rate depends on the context.
*/
function getRate() external view returns (uint256);
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
import "./IRateProvider.sol";
/**
* @dev Interface for Pools that assign rate providers to their tokens.
*/
interface IRateProviderPool {
/**
* @dev Returns the rate provider for each of the Pool's tokens. A zero-address entry means there's no rate provider
* for that token.
*/
function getRateProviders() external view returns (IRateProvider[] memory);
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
/**
* @dev Interface for the RecoveryMode module.
*/
interface IRecoveryMode {
/**
* @dev Emitted when the Recovery Mode status changes.
*/
event RecoveryModeStateChanged(bool enabled);
/**
* @notice Enables Recovery Mode in the Pool, disabling protocol fee collection and allowing for safe proportional
* exits with low computational complexity and no dependencies.
*/
function enableRecoveryMode() external;
/**
* @notice Disables Recovery Mode in the Pool, restoring protocol fee collection and disallowing proportional exits.
*/
function disableRecoveryMode() external;
/**
* @notice Returns true if the Pool is in Recovery Mode.
*/
function inRecoveryMode() external view returns (bool);
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
// solhint-disable
/**
* @dev Reverts if `condition` is false, with a revert reason containing `errorCode`. Only codes up to 999 are
* supported.
* Uses the default 'BAL' prefix for the error code
*/
function _require(bool condition, uint256 errorCode) pure {
if (!condition) _revert(errorCode);
}
/**
* @dev Reverts if `condition` is false, with a revert reason containing `errorCode`. Only codes up to 999 are
* supported.
*/
function _require(
bool condition,
uint256 errorCode,
bytes3 prefix
) pure {
if (!condition) _revert(errorCode, prefix);
}
/**
* @dev Reverts with a revert reason containing `errorCode`. Only codes up to 999 are supported.
* Uses the default 'BAL' prefix for the error code
*/
function _revert(uint256 errorCode) pure {
_revert(errorCode, 0x42414c); // This is the raw byte representation of "BAL"
}
/**
* @dev Reverts with a revert reason containing `errorCode`. Only codes up to 999 are supported.
*/
function _revert(uint256 errorCode, bytes3 prefix) pure {
uint256 prefixUint = uint256(uint24(prefix));
// We're going to dynamically create a revert string based on the error code, with the following format:
// 'BAL#{errorCode}'
// where the code is left-padded with zeroes to three digits (so they range from 000 to 999).
//
// We don't have revert strings embedded in the contract to save bytecode size: it takes much less space to store a
// number (8 to 16 bits) than the individual string characters.
//
// The dynamic string creation algorithm that follows could be implemented in Solidity, but assembly allows for a
// much denser implementation, again saving bytecode size. Given this function unconditionally reverts, this is a
// safe place to rely on it without worrying about how its usage might affect e.g. memory contents.
assembly {
// First, we need to compute the ASCII representation of the error code. We assume that it is in the 0-999
// range, so we only need to convert three digits. To convert the digits to ASCII, we add 0x30, the value for
// the '0' character.
let units := add(mod(errorCode, 10), 0x30)
errorCode := div(errorCode, 10)
let tenths := add(mod(errorCode, 10), 0x30)
errorCode := div(errorCode, 10)
let hundreds := add(mod(errorCode, 10), 0x30)
// With the individual characters, we can now construct the full string.
// We first append the '#' character (0x23) to the prefix. In the case of 'BAL', it results in 0x42414c23 ('BAL#')
// Then, we shift this by 24 (to provide space for the 3 bytes of the error code), and add the
// characters to it, each shifted by a multiple of 8.
// The revert reason is then shifted left by 200 bits (256 minus the length of the string, 7 characters * 8 bits
// per character = 56) to locate it in the most significant part of the 256 slot (the beginning of a byte
// array).
let formattedPrefix := shl(24, add(0x23, shl(8, prefixUint)))
let revertReason := shl(200, add(formattedPrefix, add(add(units, shl(8, tenths)), shl(16, hundreds))))
// We can now encode the reason in memory, which can be safely overwritten as we're about to revert. The encoded
// message will have the following layout:
// [ revert reason identifier ] [ string location offset ] [ string length ] [ string contents ]
// The Solidity revert reason identifier is 0x08c739a0, the function selector of the Error(string) function. We
// also write zeroes to the next 28 bytes of memory, but those are about to be overwritten.
mstore(0x0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
// Next is the offset to the location of the string, which will be placed immediately after (20 bytes away).
mstore(0x04, 0x0000000000000000000000000000000000000000000000000000000000000020)
// The string length is fixed: 7 characters.
mstore(0x24, 7)
// Finally, the string itself is stored.
mstore(0x44, revertReason)
// Even if the string is only 7 bytes long, we need to return a full 32 byte slot containing it. The length of
// the encoded message is therefore 4 + 32 + 32 + 32 = 100.
revert(0, 100)
}
}
library Errors {
// Math
uint256 internal constant ADD_OVERFLOW = 0;
uint256 internal constant SUB_OVERFLOW = 1;
uint256 internal constant SUB_UNDERFLOW = 2;
uint256 internal constant MUL_OVERFLOW = 3;
uint256 internal constant ZERO_DIVISION = 4;
uint256 internal constant DIV_INTERNAL = 5;
uint256 internal constant X_OUT_OF_BOUNDS = 6;
uint256 internal constant Y_OUT_OF_BOUNDS = 7;
uint256 internal constant PRODUCT_OUT_OF_BOUNDS = 8;
uint256 internal constant INVALID_EXPONENT = 9;
// Input
uint256 internal constant OUT_OF_BOUNDS = 100;
uint256 internal constant UNSORTED_ARRAY = 101;
uint256 internal constant UNSORTED_TOKENS = 102;
uint256 internal constant INPUT_LENGTH_MISMATCH = 103;
uint256 internal constant ZERO_TOKEN = 104;
uint256 internal constant INSUFFICIENT_DATA = 105;
// Shared pools
uint256 internal constant MIN_TOKENS = 200;
uint256 internal constant MAX_TOKENS = 201;
uint256 internal constant MAX_SWAP_FEE_PERCENTAGE = 202;
uint256 internal constant MIN_SWAP_FEE_PERCENTAGE = 203;
uint256 internal constant MINIMUM_BPT = 204;
uint256 internal constant CALLER_NOT_VAULT = 205;
uint256 internal constant UNINITIALIZED = 206;
uint256 internal constant BPT_IN_MAX_AMOUNT = 207;
uint256 internal constant BPT_OUT_MIN_AMOUNT = 208;
uint256 internal constant EXPIRED_PERMIT = 209;
uint256 internal constant NOT_TWO_TOKENS = 210;
uint256 internal constant DISABLED = 211;
// Pools
uint256 internal constant MIN_AMP = 300;
uint256 internal constant MAX_AMP = 301;
uint256 internal constant MIN_WEIGHT = 302;
uint256 internal constant MAX_STABLE_TOKENS = 303;
uint256 internal constant MAX_IN_RATIO = 304;
uint256 internal constant MAX_OUT_RATIO = 305;
uint256 internal constant MIN_BPT_IN_FOR_TOKEN_OUT = 306;
uint256 internal constant MAX_OUT_BPT_FOR_TOKEN_IN = 307;
uint256 internal constant NORMALIZED_WEIGHT_INVARIANT = 308;
uint256 internal constant INVALID_TOKEN = 309;
uint256 internal constant UNHANDLED_JOIN_KIND = 310;
uint256 internal constant ZERO_INVARIANT = 311;
uint256 internal constant ORACLE_INVALID_SECONDS_QUERY = 312;
uint256 internal constant ORACLE_NOT_INITIALIZED = 313;
uint256 internal constant ORACLE_QUERY_TOO_OLD = 314;
uint256 internal constant ORACLE_INVALID_INDEX = 315;
uint256 internal constant ORACLE_BAD_SECS = 316;
uint256 internal constant AMP_END_TIME_TOO_CLOSE = 317;
uint256 internal constant AMP_ONGOING_UPDATE = 318;
uint256 internal constant AMP_RATE_TOO_HIGH = 319;
uint256 internal constant AMP_NO_ONGOING_UPDATE = 320;
uint256 internal constant STABLE_INVARIANT_DIDNT_CONVERGE = 321;
uint256 internal constant STABLE_GET_BALANCE_DIDNT_CONVERGE = 322;
uint256 internal constant RELAYER_NOT_CONTRACT = 323;
uint256 internal constant BASE_POOL_RELAYER_NOT_CALLED = 324;
uint256 internal constant REBALANCING_RELAYER_REENTERED = 325;
uint256 internal constant GRADUAL_UPDATE_TIME_TRAVEL = 326;
uint256 internal constant SWAPS_DISABLED = 327;
uint256 internal constant CALLER_IS_NOT_LBP_OWNER = 328;
uint256 internal constant PRICE_RATE_OVERFLOW = 329;
uint256 internal constant INVALID_JOIN_EXIT_KIND_WHILE_SWAPS_DISABLED = 330;
uint256 internal constant WEIGHT_CHANGE_TOO_FAST = 331;
uint256 internal constant LOWER_GREATER_THAN_UPPER_TARGET = 332;
uint256 internal constant UPPER_TARGET_TOO_HIGH = 333;
uint256 internal constant UNHANDLED_BY_LINEAR_POOL = 334;
uint256 internal constant OUT_OF_TARGET_RANGE = 335;
uint256 internal constant UNHANDLED_EXIT_KIND = 336;
uint256 internal constant UNAUTHORIZED_EXIT = 337;
uint256 internal constant MAX_MANAGEMENT_SWAP_FEE_PERCENTAGE = 338;
uint256 internal constant UNHANDLED_BY_MANAGED_POOL = 339;
uint256 internal constant UNHANDLED_BY_PHANTOM_POOL = 340;
uint256 internal constant TOKEN_DOES_NOT_HAVE_RATE_PROVIDER = 341;
uint256 internal constant INVALID_INITIALIZATION = 342;
uint256 internal constant OUT_OF_NEW_TARGET_RANGE = 343;
uint256 internal constant FEATURE_DISABLED = 344;
uint256 internal constant UNINITIALIZED_POOL_CONTROLLER = 345;
uint256 internal constant SET_SWAP_FEE_DURING_FEE_CHANGE = 346;
uint256 internal constant SET_SWAP_FEE_PENDING_FEE_CHANGE = 347;
uint256 internal constant CHANGE_TOKENS_DURING_WEIGHT_CHANGE = 348;
uint256 internal constant CHANGE_TOKENS_PENDING_WEIGHT_CHANGE = 349;
uint256 internal constant MAX_WEIGHT = 350;
uint256 internal constant UNAUTHORIZED_JOIN = 351;
uint256 internal constant MAX_MANAGEMENT_AUM_FEE_PERCENTAGE = 352;
uint256 internal constant FRACTIONAL_TARGET = 353;
uint256 internal constant ADD_OR_REMOVE_BPT = 354;
uint256 internal constant INVALID_CIRCUIT_BREAKER_BOUNDS = 355;
uint256 internal constant CIRCUIT_BREAKER_TRIPPED = 356;
uint256 internal constant MALICIOUS_QUERY_REVERT = 357;
// Lib
uint256 internal constant REENTRANCY = 400;
uint256 internal constant SENDER_NOT_ALLOWED = 401;
uint256 internal constant PAUSED = 402;
uint256 internal constant PAUSE_WINDOW_EXPIRED = 403;
uint256 internal constant MAX_PAUSE_WINDOW_DURATION = 404;
uint256 internal constant MAX_BUFFER_PERIOD_DURATION = 405;
uint256 internal constant INSUFFICIENT_BALANCE = 406;
uint256 internal constant INSUFFICIENT_ALLOWANCE = 407;
uint256 internal constant ERC20_TRANSFER_FROM_ZERO_ADDRESS = 408;
uint256 internal constant ERC20_TRANSFER_TO_ZERO_ADDRESS = 409;
uint256 internal constant ERC20_MINT_TO_ZERO_ADDRESS = 410;
uint256 internal constant ERC20_BURN_FROM_ZERO_ADDRESS = 411;
uint256 internal constant ERC20_APPROVE_FROM_ZERO_ADDRESS = 412;
uint256 internal constant ERC20_APPROVE_TO_ZERO_ADDRESS = 413;
uint256 internal constant ERC20_TRANSFER_EXCEEDS_ALLOWANCE = 414;
uint256 internal constant ERC20_DECREASED_ALLOWANCE_BELOW_ZERO = 415;
uint256 internal constant ERC20_TRANSFER_EXCEEDS_BALANCE = 416;
uint256 internal constant ERC20_BURN_EXCEEDS_ALLOWANCE = 417;
uint256 internal constant SAFE_ERC20_CALL_FAILED = 418;
uint256 internal constant ADDRESS_INSUFFICIENT_BALANCE = 419;
uint256 internal constant ADDRESS_CANNOT_SEND_VALUE = 420;
uint256 internal constant SAFE_CAST_VALUE_CANT_FIT_INT256 = 421;
uint256 internal constant GRANT_SENDER_NOT_ADMIN = 422;
uint256 internal constant REVOKE_SENDER_NOT_ADMIN = 423;
uint256 internal constant RENOUNCE_SENDER_NOT_ALLOWED = 424;
uint256 internal constant BUFFER_PERIOD_EXPIRED = 425;
uint256 internal constant CALLER_IS_NOT_OWNER = 426;
uint256 internal constant NEW_OWNER_IS_ZERO = 427;
uint256 internal constant CODE_DEPLOYMENT_FAILED = 428;
uint256 internal constant CALL_TO_NON_CONTRACT = 429;
uint256 internal constant LOW_LEVEL_CALL_FAILED = 430;
uint256 internal constant NOT_PAUSED = 431;
uint256 internal constant ADDRESS_ALREADY_ALLOWLISTED = 432;
uint256 internal constant ADDRESS_NOT_ALLOWLISTED = 433;
uint256 internal constant ERC20_BURN_EXCEEDS_BALANCE = 434;
uint256 internal constant INVALID_OPERATION = 435;
uint256 internal constant CODEC_OVERFLOW = 436;
uint256 internal constant IN_RECOVERY_MODE = 437;
uint256 internal constant NOT_IN_RECOVERY_MODE = 438;
uint256 internal constant INDUCED_FAILURE = 439;
uint256 internal constant EXPIRED_SIGNATURE = 440;
uint256 internal constant MALFORMED_SIGNATURE = 441;
uint256 internal constant SAFE_CAST_VALUE_CANT_FIT_UINT64 = 442;
uint256 internal constant UNHANDLED_FEE_TYPE = 443;
uint256 internal constant BURN_FROM_ZERO = 444;
// Vault
uint256 internal constant INVALID_POOL_ID = 500;
uint256 internal constant CALLER_NOT_POOL = 501;
uint256 internal constant SENDER_NOT_ASSET_MANAGER = 502;
uint256 internal constant USER_DOESNT_ALLOW_RELAYER = 503;
uint256 internal constant INVALID_SIGNATURE = 504;
uint256 internal constant EXIT_BELOW_MIN = 505;
uint256 internal constant JOIN_ABOVE_MAX = 506;
uint256 internal constant SWAP_LIMIT = 507;
uint256 internal constant SWAP_DEADLINE = 508;
uint256 internal constant CANNOT_SWAP_SAME_TOKEN = 509;
uint256 internal constant UNKNOWN_AMOUNT_IN_FIRST_SWAP = 510;
uint256 internal constant MALCONSTRUCTED_MULTIHOP_SWAP = 511;
uint256 internal constant INTERNAL_BALANCE_OVERFLOW = 512;
uint256 internal constant INSUFFICIENT_INTERNAL_BALANCE = 513;
uint256 internal constant INVALID_ETH_INTERNAL_BALANCE = 514;
uint256 internal constant INVALID_POST_LOAN_BALANCE = 515;
uint256 internal constant INSUFFICIENT_ETH = 516;
uint256 internal constant UNALLOCATED_ETH = 517;
uint256 internal constant ETH_TRANSFER = 518;
uint256 internal constant CANNOT_USE_ETH_SENTINEL = 519;
uint256 internal constant TOKENS_MISMATCH = 520;
uint256 internal constant TOKEN_NOT_REGISTERED = 521;
uint256 internal constant TOKEN_ALREADY_REGISTERED = 522;
uint256 internal constant TOKENS_ALREADY_SET = 523;
uint256 internal constant TOKENS_LENGTH_MUST_BE_2 = 524;
uint256 internal constant NONZERO_TOKEN_BALANCE = 525;
uint256 internal constant BALANCE_TOTAL_OVERFLOW = 526;
uint256 internal constant POOL_NO_TOKENS = 527;
uint256 internal constant INSUFFICIENT_FLASH_LOAN_BALANCE = 528;
// Fees
uint256 internal constant SWAP_FEE_PERCENTAGE_TOO_HIGH = 600;
uint256 internal constant FLASH_LOAN_FEE_PERCENTAGE_TOO_HIGH = 601;
uint256 internal constant INSUFFICIENT_FLASH_LOAN_FEE_AMOUNT = 602;
uint256 internal constant AUM_FEE_PERCENTAGE_TOO_HIGH = 603;
// FeeSplitter
uint256 internal constant SPLITTER_FEE_PERCENTAGE_TOO_HIGH = 700;
// Misc
uint256 internal constant UNIMPLEMENTED = 998;
uint256 internal constant SHOULD_NOT_HAPPEN = 999;
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
interface IAuthentication {
/**
* @dev Returns the action identifier associated with the external function described by `selector`.
*/
function getActionId(bytes4 selector) external view returns (bytes32);
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
/**
* @dev Interface for the SignatureValidator helper, used to support meta-transactions.
*/
interface ISignaturesValidator {
/**
* @dev Returns the EIP712 domain separator.
*/
function getDomainSeparator() external view returns (bytes32);
/**
* @dev Returns the next nonce used by an address to sign messages.
*/
function getNextNonce(address user) external view returns (uint256);
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
/**
* @dev Interface for the TemporarilyPausable helper.
*/
interface ITemporarilyPausable {
/**
* @dev Emitted every time the pause state changes by `_setPaused`.
*/
event PausedStateChanged(bool paused);
/**
* @dev Returns the current paused state.
*/
function getPausedState()
external
view
returns (
bool paused,
uint256 pauseWindowEndTime,
uint256 bufferPeriodEndTime
);
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
import "../openzeppelin/IERC20.sol";
/**
* @dev Interface for WETH9.
* See https://github.com/gnosis/canonical-weth/blob/0dd1ea3e295eef916d0c6223ec63141137d22d67/contracts/WETH9.sol
*/
interface IWETH is IERC20 {
function deposit() external payable;
function withdraw(uint256 amount) external;
}// SPDX-License-Identifier: MIT
pragma solidity >=0.7.0 <0.9.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
/**
* @dev This is an empty interface used to represent either ERC20-conforming token contracts or ETH (using the zero
* address sentinel value). We're just relying on the fact that `interface` can be used to declare new address-like
* types.
*
* This concept is unrelated to a Pool's Asset Managers.
*/
interface IAsset {
// solhint-disable-previous-line no-empty-blocks
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
interface IAuthorizer {
/**
* @dev Returns true if `account` can perform the action described by `actionId` in the contract `where`.
*/
function canPerform(
bytes32 actionId,
address account,
address where
) external view returns (bool);
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
// Inspired by Aave Protocol's IFlashLoanReceiver.
import "../solidity-utils/openzeppelin/IERC20.sol";
interface IFlashLoanRecipient {
/**
* @dev When `flashLoan` is called on the Vault, it invokes the `receiveFlashLoan` hook on the recipient.
*
* At the time of the call, the Vault will have transferred `amounts` for `tokens` to the recipient. Before this
* call returns, the recipient must have transferred `amounts` plus `feeAmounts` for each token back to the
* Vault, or else the entire flash loan will revert.
*
* `userData` is the same value passed in the `IVault.flashLoan` call.
*/
function receiveFlashLoan(
IERC20[] memory tokens,
uint256[] memory amounts,
uint256[] memory feeAmounts,
bytes memory userData
) external;
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
pragma experimental ABIEncoderV2;
import "../solidity-utils/openzeppelin/IERC20.sol";
import "./IVault.sol";
import "./IAuthorizer.sol";
interface IProtocolFeesCollector {
event SwapFeePercentageChanged(uint256 newSwapFeePercentage);
event FlashLoanFeePercentageChanged(uint256 newFlashLoanFeePercentage);
function withdrawCollectedFees(
IERC20[] calldata tokens,
uint256[] calldata amounts,
address recipient
) external;
function setSwapFeePercentage(uint256 newSwapFeePercentage) external;
function setFlashLoanFeePercentage(uint256 newFlashLoanFeePercentage) external;
function getSwapFeePercentage() external view returns (uint256);
function getFlashLoanFeePercentage() external view returns (uint256);
function getCollectedFeeAmounts(IERC20[] memory tokens) external view returns (uint256[] memory feeAmounts);
function getAuthorizer() external view returns (IAuthorizer);
function vault() external view returns (IVault);
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma experimental ABIEncoderV2;
import "../solidity-utils/openzeppelin/IERC20.sol";
import "../solidity-utils/helpers/IAuthentication.sol";
import "../solidity-utils/helpers/ISignaturesValidator.sol";
import "../solidity-utils/helpers/ITemporarilyPausable.sol";
import "../solidity-utils/misc/IWETH.sol";
import "./IAsset.sol";
import "./IAuthorizer.sol";
import "./IFlashLoanRecipient.sol";
import "./IProtocolFeesCollector.sol";
pragma solidity >=0.7.0 <0.9.0;
/**
* @dev Full external interface for the Vault core contract - no external or public methods exist in the contract that
* don't override one of these declarations.
*/
interface IVault is ISignaturesValidator, ITemporarilyPausable, IAuthentication {
// Generalities about the Vault:
//
// - Whenever documentation refers to 'tokens', it strictly refers to ERC20-compliant token contracts. Tokens are
// transferred out of the Vault by calling the `IERC20.transfer` function, and transferred in by calling
// `IERC20.transferFrom`. In these cases, the sender must have previously allowed the Vault to use their tokens by
// calling `IERC20.approve`. The only deviation from the ERC20 standard that is supported is functions not returning
// a boolean value: in these scenarios, a non-reverting call is assumed to be successful.
//
// - All non-view functions in the Vault are non-reentrant: calling them while another one is mid-execution (e.g.
// while execution control is transferred to a token contract during a swap) will result in a revert. View
// functions can be called in a re-reentrant way, but doing so might cause them to return inconsistent results.
// Contracts calling view functions in the Vault must make sure the Vault has not already been entered.
//
// - View functions revert if referring to either unregistered Pools, or unregistered tokens for registered Pools.
// Authorizer
//
// Some system actions are permissioned, like setting and collecting protocol fees. This permissioning system exists
// outside of the Vault in the Authorizer contract: the Vault simply calls the Authorizer to check if the caller
// can perform a given action.
/**
* @dev Returns the Vault's Authorizer.
*/
function getAuthorizer() external view returns (IAuthorizer);
/**
* @dev Sets a new Authorizer for the Vault. The caller must be allowed by the current Authorizer to do this.
*
* Emits an `AuthorizerChanged` event.
*/
function setAuthorizer(IAuthorizer newAuthorizer) external;
/**
* @dev Emitted when a new authorizer is set by `setAuthorizer`.
*/
event AuthorizerChanged(IAuthorizer indexed newAuthorizer);
// Relayers
//
// Additionally, it is possible for an account to perform certain actions on behalf of another one, using their
// Vault ERC20 allowance and Internal Balance. These accounts are said to be 'relayers' for these Vault functions,
// and are expected to be smart contracts with sound authentication mechanisms. For an account to be able to wield
// this power, two things must occur:
// - The Authorizer must grant the account the permission to be a relayer for the relevant Vault function. This
// means that Balancer governance must approve each individual contract to act as a relayer for the intended
// functions.
// - Each user must approve the relayer to act on their behalf.
// This double protection means users cannot be tricked into approving malicious relayers (because they will not
// have been allowed by the Authorizer via governance), nor can malicious relayers approved by a compromised
// Authorizer or governance drain user funds, since they would also need to be approved by each individual user.
/**
* @dev Returns true if `user` has approved `relayer` to act as a relayer for them.
*/
function hasApprovedRelayer(address user, address relayer) external view returns (bool);
/**
* @dev Allows `relayer` to act as a relayer for `sender` if `approved` is true, and disallows it otherwise.
*
* Emits a `RelayerApprovalChanged` event.
*/
function setRelayerApproval(
address sender,
address relayer,
bool approved
) external;
/**
* @dev Emitted every time a relayer is approved or disapproved by `setRelayerApproval`.
*/
event RelayerApprovalChanged(address indexed relayer, address indexed sender, bool approved);
// Internal Balance
//
// Users can deposit tokens into the Vault, where they are allocated to their Internal Balance, and later
// transferred or withdrawn. It can also be used as a source of tokens when joining Pools, as a destination
// when exiting them, and as either when performing swaps. This usage of Internal Balance results in greatly reduced
// gas costs when compared to relying on plain ERC20 transfers, leading to large savings for frequent users.
//
// Internal Balance management features batching, which means a single contract call can be used to perform multiple
// operations of different kinds, with different senders and recipients, at once.
/**
* @dev Returns `user`'s Internal Balance for a set of tokens.
*/
function getInternalBalance(address user, IERC20[] memory tokens) external view returns (uint256[] memory);
/**
* @dev Performs a set of user balance operations, which involve Internal Balance (deposit, withdraw or transfer)
* and plain ERC20 transfers using the Vault's allowance. This last feature is particularly useful for relayers, as
* it lets integrators reuse a user's Vault allowance.
*
* For each operation, if the caller is not `sender`, it must be an authorized relayer for them.
*/
function manageUserBalance(UserBalanceOp[] memory ops) external payable;
/**
* @dev Data for `manageUserBalance` operations, which include the possibility for ETH to be sent and received
without manual WETH wrapping or unwrapping.
*/
struct UserBalanceOp {
UserBalanceOpKind kind;
IAsset asset;
uint256 amount;
address sender;
address payable recipient;
}
// There are four possible operations in `manageUserBalance`:
//
// - DEPOSIT_INTERNAL
// Increases the Internal Balance of the `recipient` account by transferring tokens from the corresponding
// `sender`. The sender must have allowed the Vault to use their tokens via `IERC20.approve()`.
//
// ETH can be used by passing the ETH sentinel value as the asset and forwarding ETH in the call: it will be wrapped
// and deposited as WETH. Any ETH amount remaining will be sent back to the caller (not the sender, which is
// relevant for relayers).
//
// Emits an `InternalBalanceChanged` event.
//
//
// - WITHDRAW_INTERNAL
// Decreases the Internal Balance of the `sender` account by transferring tokens to the `recipient`.
//
// ETH can be used by passing the ETH sentinel value as the asset. This will deduct WETH instead, unwrap it and send
// it to the recipient as ETH.
//
// Emits an `InternalBalanceChanged` event.
//
//
// - TRANSFER_INTERNAL
// Transfers tokens from the Internal Balance of the `sender` account to the Internal Balance of `recipient`.
//
// Reverts if the ETH sentinel value is passed.
//
// Emits an `InternalBalanceChanged` event.
//
//
// - TRANSFER_EXTERNAL
// Transfers tokens from `sender` to `recipient`, using the Vault's ERC20 allowance. This is typically used by
// relayers, as it lets them reuse a user's Vault allowance.
//
// Reverts if the ETH sentinel value is passed.
//
// Emits an `ExternalBalanceTransfer` event.
enum UserBalanceOpKind { DEPOSIT_INTERNAL, WITHDRAW_INTERNAL, TRANSFER_INTERNAL, TRANSFER_EXTERNAL }
/**
* @dev Emitted when a user's Internal Balance changes, either from calls to `manageUserBalance`, or through
* interacting with Pools using Internal Balance.
*
* Because Internal Balance works exclusively with ERC20 tokens, ETH deposits and withdrawals will use the WETH
* address.
*/
event InternalBalanceChanged(address indexed user, IERC20 indexed token, int256 delta);
/**
* @dev Emitted when a user's Vault ERC20 allowance is used by the Vault to transfer tokens to an external account.
*/
event ExternalBalanceTransfer(IERC20 indexed token, address indexed sender, address recipient, uint256 amount);
// Pools
//
// There are three specialization settings for Pools, which allow for cheaper swaps at the cost of reduced
// functionality:
//
// - General: no specialization, suited for all Pools. IGeneralPool is used for swap request callbacks, passing the
// balance of all tokens in the Pool. These Pools have the largest swap costs (because of the extra storage reads),
// which increase with the number of registered tokens.
//
// - Minimal Swap Info: IMinimalSwapInfoPool is used instead of IGeneralPool, which saves gas by only passing the
// balance of the two tokens involved in the swap. This is suitable for some pricing algorithms, like the weighted
// constant product one popularized by Balancer V1. Swap costs are smaller compared to general Pools, and are
// independent of the number of registered tokens.
//
// - Two Token: only allows two tokens to be registered. This achieves the lowest possible swap gas cost. Like
// minimal swap info Pools, these are called via IMinimalSwapInfoPool.
enum PoolSpecialization { GENERAL, MINIMAL_SWAP_INFO, TWO_TOKEN }
/**
* @dev Registers the caller account as a Pool with a given specialization setting. Returns the Pool's ID, which
* is used in all Pool-related functions. Pools cannot be deregistered, nor can the Pool's specialization be
* changed.
*
* The caller is expected to be a smart contract that implements either `IGeneralPool` or `IMinimalSwapInfoPool`,
* depending on the chosen specialization setting. This contract is known as the Pool's contract.
*
* Note that the same contract may register itself as multiple Pools with unique Pool IDs, or in other words,
* multiple Pools may share the same contract.
*
* Emits a `PoolRegistered` event.
*/
function registerPool(PoolSpecialization specialization) external returns (bytes32);
/**
* @dev Emitted when a Pool is registered by calling `registerPool`.
*/
event PoolRegistered(bytes32 indexed poolId, address indexed poolAddress, PoolSpecialization specialization);
/**
* @dev Returns a Pool's contract address and specialization setting.
*/
function getPool(bytes32 poolId) external view returns (address, PoolSpecialization);
/**
* @dev Registers `tokens` for the `poolId` Pool. Must be called by the Pool's contract.
*
* Pools can only interact with tokens they have registered. Users join a Pool by transferring registered tokens,
* exit by receiving registered tokens, and can only swap registered tokens.
*
* Each token can only be registered once. For Pools with the Two Token specialization, `tokens` must have a length
* of two, that is, both tokens must be registered in the same `registerTokens` call, and they must be sorted in
* ascending order.
*
* The `tokens` and `assetManagers` arrays must have the same length, and each entry in these indicates the Asset
* Manager for the corresponding token. Asset Managers can manage a Pool's tokens via `managePoolBalance`,
* depositing and withdrawing them directly, and can even set their balance to arbitrary amounts. They are therefore
* expected to be highly secured smart contracts with sound design principles, and the decision to register an
* Asset Manager should not be made lightly.
*
* Pools can choose not to assign an Asset Manager to a given token by passing in the zero address. Once an Asset
* Manager is set, it cannot be changed except by deregistering the associated token and registering again with a
* different Asset Manager.
*
* Emits a `TokensRegistered` event.
*/
function registerTokens(
bytes32 poolId,
IERC20[] memory tokens,
address[] memory assetManagers
) external;
/**
* @dev Emitted when a Pool registers tokens by calling `registerTokens`.
*/
event TokensRegistered(bytes32 indexed poolId, IERC20[] tokens, address[] assetManagers);
/**
* @dev Deregisters `tokens` for the `poolId` Pool. Must be called by the Pool's contract.
*
* Only registered tokens (via `registerTokens`) can be deregistered. Additionally, they must have zero total
* balance. For Pools with the Two Token specialization, `tokens` must have a length of two, that is, both tokens
* must be deregistered in the same `deregisterTokens` call.
*
* A deregistered token can be re-registered later on, possibly with a different Asset Manager.
*
* Emits a `TokensDeregistered` event.
*/
function deregisterTokens(bytes32 poolId, IERC20[] memory tokens) external;
/**
* @dev Emitted when a Pool deregisters tokens by calling `deregisterTokens`.
*/
event TokensDeregistered(bytes32 indexed poolId, IERC20[] tokens);
/**
* @dev Returns detailed information for a Pool's registered token.
*
* `cash` is the number of tokens the Vault currently holds for the Pool. `managed` is the number of tokens
* withdrawn and held outside the Vault by the Pool's token Asset Manager. The Pool's total balance for `token`
* equals the sum of `cash` and `managed`.
*
* Internally, `cash` and `managed` are stored using 112 bits. No action can ever cause a Pool's token `cash`,
* `managed` or `total` balance to be greater than 2^112 - 1.
*
* `lastChangeBlock` is the number of the block in which `token`'s total balance was last modified (via either a
* join, exit, swap, or Asset Manager update). This value is useful to avoid so-called 'sandwich attacks', for
* example when developing price oracles. A change of zero (e.g. caused by a swap with amount zero) is considered a
* change for this purpose, and will update `lastChangeBlock`.
*
* `assetManager` is the Pool's token Asset Manager.
*/
function getPoolTokenInfo(bytes32 poolId, IERC20 token)
external
view
returns (
uint256 cash,
uint256 managed,
uint256 lastChangeBlock,
address assetManager
);
/**
* @dev Returns a Pool's registered tokens, the total balance for each, and the latest block when *any* of
* the tokens' `balances` changed.
*
* The order of the `tokens` array is the same order that will be used in `joinPool`, `exitPool`, as well as in all
* Pool hooks (where applicable). Calls to `registerTokens` and `deregisterTokens` may change this order.
*
* If a Pool only registers tokens once, and these are sorted in ascending order, they will be stored in the same
* order as passed to `registerTokens`.
*
* Total balances include both tokens held by the Vault and those withdrawn by the Pool's Asset Managers. These are
* the amounts used by joins, exits and swaps. For a detailed breakdown of token balances, use `getPoolTokenInfo`
* instead.
*/
function getPoolTokens(bytes32 poolId)
external
view
returns (
IERC20[] memory tokens,
uint256[] memory balances,
uint256 lastChangeBlock
);
/**
* @dev Called by users to join a Pool, which transfers tokens from `sender` into the Pool's balance. This will
* trigger custom Pool behavior, which will typically grant something in return to `recipient` - often tokenized
* Pool shares.
*
* If the caller is not `sender`, it must be an authorized relayer for them.
*
* The `assets` and `maxAmountsIn` arrays must have the same length, and each entry indicates the maximum amount
* to send for each asset. The amounts to send are decided by the Pool and not the Vault: it just enforces
* these maximums.
*
* If joining a Pool that holds WETH, it is possible to send ETH directly: the Vault will do the wrapping. To enable
* this mechanism, the IAsset sentinel value (the zero address) must be passed in the `assets` array instead of the
* WETH address. Note that it is not possible to combine ETH and WETH in the same join. Any excess ETH will be sent
* back to the caller (not the sender, which is important for relayers).
*
* `assets` must have the same length and order as the array returned by `getPoolTokens`. This prevents issues when
* interacting with Pools that register and deregister tokens frequently. If sending ETH however, the array must be
* sorted *before* replacing the WETH address with the ETH sentinel value (the zero address), which means the final
* `assets` array might not be sorted. Pools with no registered tokens cannot be joined.
*
* If `fromInternalBalance` is true, the caller's Internal Balance will be preferred: ERC20 transfers will only
* be made for the difference between the requested amount and Internal Balance (if any). Note that ETH cannot be
* withdrawn from Internal Balance: attempting to do so will trigger a revert.
*
* This causes the Vault to call the `IBasePool.onJoinPool` hook on the Pool's contract, where Pools implement
* their own custom logic. This typically requires additional information from the user (such as the expected number
* of Pool shares). This can be encoded in the `userData` argument, which is ignored by the Vault and passed
* directly to the Pool's contract, as is `recipient`.
*
* Emits a `PoolBalanceChanged` event.
*/
function joinPool(
bytes32 poolId,
address sender,
address recipient,
JoinPoolRequest memory request
) external payable;
struct JoinPoolRequest {
IAsset[] assets;
uint256[] maxAmountsIn;
bytes userData;
bool fromInternalBalance;
}
/**
* @dev Called by users to exit a Pool, which transfers tokens from the Pool's balance to `recipient`. This will
* trigger custom Pool behavior, which will typically ask for something in return from `sender` - often tokenized
* Pool shares. The amount of tokens that can be withdrawn is limited by the Pool's `cash` balance (see
* `getPoolTokenInfo`).
*
* If the caller is not `sender`, it must be an authorized relayer for them.
*
* The `tokens` and `minAmountsOut` arrays must have the same length, and each entry in these indicates the minimum
* token amount to receive for each token contract. The amounts to send are decided by the Pool and not the Vault:
* it just enforces these minimums.
*
* If exiting a Pool that holds WETH, it is possible to receive ETH directly: the Vault will do the unwrapping. To
* enable this mechanism, the IAsset sentinel value (the zero address) must be passed in the `assets` array instead
* of the WETH address. Note that it is not possible to combine ETH and WETH in the same exit.
*
* `assets` must have the same length and order as the array returned by `getPoolTokens`. This prevents issues when
* interacting with Pools that register and deregister tokens frequently. If receiving ETH however, the array must
* be sorted *before* replacing the WETH address with the ETH sentinel value (the zero address), which means the
* final `assets` array might not be sorted. Pools with no registered tokens cannot be exited.
*
* If `toInternalBalance` is true, the tokens will be deposited to `recipient`'s Internal Balance. Otherwise,
* an ERC20 transfer will be performed. Note that ETH cannot be deposited to Internal Balance: attempting to
* do so will trigger a revert.
*
* `minAmountsOut` is the minimum amount of tokens the user expects to get out of the Pool, for each token in the
* `tokens` array. This array must match the Pool's registered tokens.
*
* This causes the Vault to call the `IBasePool.onExitPool` hook on the Pool's contract, where Pools implement
* their own custom logic. This typically requires additional information from the user (such as the expected number
* of Pool shares to return). This can be encoded in the `userData` argument, which is ignored by the Vault and
* passed directly to the Pool's contract.
*
* Emits a `PoolBalanceChanged` event.
*/
function exitPool(
bytes32 poolId,
address sender,
address payable recipient,
ExitPoolRequest memory request
) external;
struct ExitPoolRequest {
IAsset[] assets;
uint256[] minAmountsOut;
bytes userData;
bool toInternalBalance;
}
/**
* @dev Emitted when a user joins or exits a Pool by calling `joinPool` or `exitPool`, respectively.
*/
event PoolBalanceChanged(
bytes32 indexed poolId,
address indexed liquidityProvider,
IERC20[] tokens,
int256[] deltas,
uint256[] protocolFeeAmounts
);
enum PoolBalanceChangeKind { JOIN, EXIT }
// Swaps
//
// Users can swap tokens with Pools by calling the `swap` and `batchSwap` functions. To do this,
// they need not trust Pool contracts in any way: all security checks are made by the Vault. They must however be
// aware of the Pools' pricing algorithms in order to estimate the prices Pools will quote.
//
// The `swap` function executes a single swap, while `batchSwap` can perform multiple swaps in sequence.
// In each individual swap, tokens of one kind are sent from the sender to the Pool (this is the 'token in'),
// and tokens of another kind are sent from the Pool to the recipient in exchange (this is the 'token out').
// More complex swaps, such as one token in to multiple tokens out can be achieved by batching together
// individual swaps.
//
// There are two swap kinds:
// - 'given in' swaps, where the amount of tokens in (sent to the Pool) is known, and the Pool determines (via the
// `onSwap` hook) the amount of tokens out (to send to the recipient).
// - 'given out' swaps, where the amount of tokens out (received from the Pool) is known, and the Pool determines
// (via the `onSwap` hook) the amount of tokens in (to receive from the sender).
//
// Additionally, it is possible to chain swaps using a placeholder input amount, which the Vault replaces with
// the calculated output of the previous swap. If the previous swap was 'given in', this will be the calculated
// tokenOut amount. If the previous swap was 'given out', it will use the calculated tokenIn amount. These extended
// swaps are known as 'multihop' swaps, since they 'hop' through a number of intermediate tokens before arriving at
// the final intended token.
//
// In all cases, tokens are only transferred in and out of the Vault (or withdrawn from and deposited into Internal
// Balance) after all individual swaps have been completed, and the net token balance change computed. This makes
// certain swap patterns, such as multihops, or swaps that interact with the same token pair in multiple Pools, cost
// much less gas than they would otherwise.
//
// It also means that under certain conditions it is possible to perform arbitrage by swapping with multiple
// Pools in a way that results in net token movement out of the Vault (profit), with no tokens being sent in (only
// updating the Pool's internal accounting).
//
// To protect users from front-running or the market changing rapidly, they supply a list of 'limits' for each token
// involved in the swap, where either the maximum number of tokens to send (by passing a positive value) or the
// minimum amount of tokens to receive (by passing a negative value) is specified.
//
// Additionally, a 'deadline' timestamp can also be provided, forcing the swap to fail if it occurs after
// this point in time (e.g. if the transaction failed to be included in a block promptly).
//
// If interacting with Pools that hold WETH, it is possible to both send and receive ETH directly: the Vault will do
// the wrapping and unwrapping. To enable this mechanism, the IAsset sentinel value (the zero address) must be
// passed in the `assets` array instead of the WETH address. Note that it is possible to combine ETH and WETH in the
// same swap. Any excess ETH will be sent back to the caller (not the sender, which is relevant for relayers).
//
// Finally, Internal Balance can be used when either sending or receiving tokens.
enum SwapKind { GIVEN_IN, GIVEN_OUT }
/**
* @dev Performs a swap with a single Pool.
*
* If the swap is 'given in' (the number of tokens to send to the Pool is known), it returns the amount of tokens
* taken from the Pool, which must be greater than or equal to `limit`.
*
* If the swap is 'given out' (the number of tokens to take from the Pool is known), it returns the amount of tokens
* sent to the Pool, which must be less than or equal to `limit`.
*
* Internal Balance usage and the recipient are determined by the `funds` struct.
*
* Emits a `Swap` event.
*/
function swap(
SingleSwap memory singleSwap,
FundManagement memory funds,
uint256 limit,
uint256 deadline
) external payable returns (uint256);
/**
* @dev Data for a single swap executed by `swap`. `amount` is either `amountIn` or `amountOut` depending on
* the `kind` value.
*
* `assetIn` and `assetOut` are either token addresses, or the IAsset sentinel value for ETH (the zero address).
* Note that Pools never interact with ETH directly: it will be wrapped to or unwrapped from WETH by the Vault.
*
* The `userData` field is ignored by the Vault, but forwarded to the Pool in the `onSwap` hook, and may be
* used to extend swap behavior.
*/
struct SingleSwap {
bytes32 poolId;
SwapKind kind;
IAsset assetIn;
IAsset assetOut;
uint256 amount;
bytes userData;
}
/**
* @dev Performs a series of swaps with one or multiple Pools. In each individual swap, the caller determines either
* the amount of tokens sent to or received from the Pool, depending on the `kind` value.
*
* Returns an array with the net Vault asset balance deltas. Positive amounts represent tokens (or ETH) sent to the
* Vault, and negative amounts represent tokens (or ETH) sent by the Vault. Each delta corresponds to the asset at
* the same index in the `assets` array.
*
* Swaps are executed sequentially, in the order specified by the `swaps` array. Each array element describes a
* Pool, the token to be sent to this Pool, the token to receive from it, and an amount that is either `amountIn` or
* `amountOut` depending on the swap kind.
*
* Multihop swaps can be executed by passing an `amount` value of zero for a swap. This will cause the amount in/out
* of the previous swap to be used as the amount in for the current one. In a 'given in' swap, 'tokenIn' must equal
* the previous swap's `tokenOut`. For a 'given out' swap, `tokenOut` must equal the previous swap's `tokenIn`.
*
* The `assets` array contains the addresses of all assets involved in the swaps. These are either token addresses,
* or the IAsset sentinel value for ETH (the zero address). Each entry in the `swaps` array specifies tokens in and
* out by referencing an index in `assets`. Note that Pools never interact with ETH directly: it will be wrapped to
* or unwrapped from WETH by the Vault.
*
* Internal Balance usage, sender, and recipient are determined by the `funds` struct. The `limits` array specifies
* the minimum or maximum amount of each token the vault is allowed to transfer.
*
* `batchSwap` can be used to make a single swap, like `swap` does, but doing so requires more gas than the
* equivalent `swap` call.
*
* Emits `Swap` events.
*/
function batchSwap(
SwapKind kind,
BatchSwapStep[] memory swaps,
IAsset[] memory assets,
FundManagement memory funds,
int256[] memory limits,
uint256 deadline
) external payable returns (int256[] memory);
/**
* @dev Data for each individual swap executed by `batchSwap`. The asset in and out fields are indexes into the
* `assets` array passed to that function, and ETH assets are converted to WETH.
*
* If `amount` is zero, the multihop mechanism is used to determine the actual amount based on the amount in/out
* from the previous swap, depending on the swap kind.
*
* The `userData` field is ignored by the Vault, but forwarded to the Pool in the `onSwap` hook, and may be
* used to extend swap behavior.
*/
struct BatchSwapStep {
bytes32 poolId;
uint256 assetInIndex;
uint256 assetOutIndex;
uint256 amount;
bytes userData;
}
/**
* @dev Emitted for each individual swap performed by `swap` or `batchSwap`.
*/
event Swap(
bytes32 indexed poolId,
IERC20 indexed tokenIn,
IERC20 indexed tokenOut,
uint256 amountIn,
uint256 amountOut
);
/**
* @dev All tokens in a swap are either sent from the `sender` account to the Vault, or from the Vault to the
* `recipient` account.
*
* If the caller is not `sender`, it must be an authorized relayer for them.
*
* If `fromInternalBalance` is true, the `sender`'s Internal Balance will be preferred, performing an ERC20
* transfer for the difference between the requested amount and the User's Internal Balance (if any). The `sender`
* must have allowed the Vault to use their tokens via `IERC20.approve()`. This matches the behavior of
* `joinPool`.
*
* If `toInternalBalance` is true, tokens will be deposited to `recipient`'s internal balance instead of
* transferred. This matches the behavior of `exitPool`.
*
* Note that ETH cannot be deposited to or withdrawn from Internal Balance: attempting to do so will trigger a
* revert.
*/
struct FundManagement {
address sender;
bool fromInternalBalance;
address payable recipient;
bool toInternalBalance;
}
/**
* @dev Simulates a call to `batchSwap`, returning an array of Vault asset deltas. Calls to `swap` cannot be
* simulated directly, but an equivalent `batchSwap` call can and will yield the exact same result.
*
* Each element in the array corresponds to the asset at the same index, and indicates the number of tokens (or ETH)
* the Vault would take from the sender (if positive) or send to the recipient (if negative). The arguments it
* receives are the same that an equivalent `batchSwap` call would receive.
*
* Unlike `batchSwap`, this function performs no checks on the sender or recipient field in the `funds` struct.
* This makes it suitable to be called by off-chain applications via eth_call without needing to hold tokens,
* approve them for the Vault, or even know a user's address.
*
* Note that this function is not 'view' (due to implementation details): the client code must explicitly execute
* eth_call instead of eth_sendTransaction.
*/
function queryBatchSwap(
SwapKind kind,
BatchSwapStep[] memory swaps,
IAsset[] memory assets,
FundManagement memory funds
) external returns (int256[] memory assetDeltas);
// Flash Loans
/**
* @dev Performs a 'flash loan', sending tokens to `recipient`, executing the `receiveFlashLoan` hook on it,
* and then reverting unless the tokens plus a proportional protocol fee have been returned.
*
* The `tokens` and `amounts` arrays must have the same length, and each entry in these indicates the loan amount
* for each token contract. `tokens` must be sorted in ascending order.
*
* The 'userData' field is ignored by the Vault, and forwarded as-is to `recipient` as part of the
* `receiveFlashLoan` call.
*
* Emits `FlashLoan` events.
*/
function flashLoan(
IFlashLoanRecipient recipient,
IERC20[] memory tokens,
uint256[] memory amounts,
bytes memory userData
) external;
/**
* @dev Emitted for each individual flash loan performed by `flashLoan`.
*/
event FlashLoan(IFlashLoanRecipient indexed recipient, IERC20 indexed token, uint256 amount, uint256 feeAmount);
// Asset Management
//
// Each token registered for a Pool can be assigned an Asset Manager, which is able to freely withdraw the Pool's
// tokens from the Vault, deposit them, or assign arbitrary values to its `managed` balance (see
// `getPoolTokenInfo`). This makes them extremely powerful and dangerous. Even if an Asset Manager only directly
// controls one of the tokens in a Pool, a malicious manager could set that token's balance to manipulate the
// prices of the other tokens, and then drain the Pool with swaps. The risk of using Asset Managers is therefore
// not constrained to the tokens they are managing, but extends to the entire Pool's holdings.
//
// However, a properly designed Asset Manager smart contract can be safely used for the Pool's benefit,
// for example by lending unused tokens out for interest, or using them to participate in voting protocols.
//
// This concept is unrelated to the IAsset interface.
/**
* @dev Performs a set of Pool balance operations, which may be either withdrawals, deposits or updates.
*
* Pool Balance management features batching, which means a single contract call can be used to perform multiple
* operations of different kinds, with different Pools and tokens, at once.
*
* For each operation, the caller must be registered as the Asset Manager for `token` in `poolId`.
*/
function managePoolBalance(PoolBalanceOp[] memory ops) external;
struct PoolBalanceOp {
PoolBalanceOpKind kind;
bytes32 poolId;
IERC20 token;
uint256 amount;
}
/**
* Withdrawals decrease the Pool's cash, but increase its managed balance, leaving the total balance unchanged.
*
* Deposits increase the Pool's cash, but decrease its managed balance, leaving the total balance unchanged.
*
* Updates don't affect the Pool's cash balance, but because the managed balance changes, it does alter the total.
* The external amount can be either increased or decreased by this call (i.e., reporting a gain or a loss).
*/
enum PoolBalanceOpKind { WITHDRAW, DEPOSIT, UPDATE }
/**
* @dev Emitted when a Pool's token Asset Manager alters its balance via `managePoolBalance`.
*/
event PoolBalanceManaged(
bytes32 indexed poolId,
address indexed assetManager,
IERC20 indexed token,
int256 cashDelta,
int256 managedDelta
);
// Protocol Fees
//
// Some operations cause the Vault to collect tokens in the form of protocol fees, which can then be withdrawn by
// permissioned accounts.
//
// There are two kinds of protocol fees:
//
// - flash loan fees: charged on all flash loans, as a percentage of the amounts lent.
//
// - swap fees: a percentage of the fees charged by Pools when performing swaps. For a number of reasons, including
// swap gas costs and interface simplicity, protocol swap fees are not charged on each individual swap. Rather,
// Pools are expected to keep track of how much they have charged in swap fees, and pay any outstanding debts to the
// Vault when they are joined or exited. This prevents users from joining a Pool with unpaid debt, as well as
// exiting a Pool in debt without first paying their share.
/**
* @dev Returns the current protocol fee module.
*/
function getProtocolFeesCollector() external view returns (IProtocolFeesCollector);
/**
* @dev Safety mechanism to pause most Vault operations in the event of an emergency - typically detection of an
* error in some part of the system.
*
* The Vault can only be paused during an initial time period, after which pausing is forever disabled.
*
* While the contract is paused, the following features are disabled:
* - depositing and transferring internal balance
* - transferring external balance (using the Vault's allowance)
* - swaps
* - joining Pools
* - Asset Manager interactions
*
* Internal Balance can still be withdrawn, and Pools exited.
*/
function setPaused(bool paused) external;
/**
* @dev Returns the Vault's WETH instance.
*/
function WETH() external view returns (IWETH);
// solhint-disable-previous-line func-name-mixedcase
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "@balancer-labs/v2-interfaces/contracts/solidity-utils/helpers/BalancerErrors.sol";
import "@balancer-labs/v2-interfaces/contracts/solidity-utils/helpers/IAuthentication.sol";
/**
* @dev Building block for performing access control on external functions.
*
* This contract is used via the `authenticate` modifier (or the `_authenticateCaller` function), which can be applied
* to external functions to only make them callable by authorized accounts.
*
* Derived contracts must implement the `_canPerform` function, which holds the actual access control logic.
*/
abstract contract Authentication is IAuthentication {
bytes32 private immutable _actionIdDisambiguator;
/**
* @dev The main purpose of the `actionIdDisambiguator` is to prevent accidental function selector collisions in
* multi contract systems.
*
* There are two main uses for it:
* - if the contract is a singleton, any unique identifier can be used to make the associated action identifiers
* unique. The contract's own address is a good option.
* - if the contract belongs to a family that shares action identifiers for the same functions, an identifier
* shared by the entire family (and no other contract) should be used instead.
*/
constructor(bytes32 actionIdDisambiguator) {
_actionIdDisambiguator = actionIdDisambiguator;
}
/**
* @dev Reverts unless the caller is allowed to call this function. Should only be applied to external functions.
*/
modifier authenticate() {
_authenticateCaller();
_;
}
/**
* @dev Reverts unless the caller is allowed to call the entry point function.
*/
function _authenticateCaller() internal view {
bytes32 actionId = getActionId(msg.sig);
_require(_canPerform(actionId, msg.sender), Errors.SENDER_NOT_ALLOWED);
}
function getActionId(bytes4 selector) public view override returns (bytes32) {
// Each external function is dynamically assigned an action identifier as the hash of the disambiguator and the
// function selector. Disambiguation is necessary to avoid potential collisions in the function selectors of
// multiple contracts.
return keccak256(abi.encodePacked(_actionIdDisambiguator, selector));
}
function _canPerform(bytes32 actionId, address user) internal view virtual returns (bool);
}// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "@balancer-labs/v2-interfaces/contracts/liquidity-mining/IAuthorizerAdaptor.sol";
import "@balancer-labs/v2-interfaces/contracts/vault/IVault.sol";
import "./Authentication.sol";
abstract contract SingletonAuthentication is Authentication {
IVault private immutable _vault;
// Use the contract's own address to disambiguate action identifiers
constructor(IVault vault) Authentication(bytes32(uint256(address(this)))) {
_vault = vault;
}
/**
* @notice Returns the Balancer Vault
*/
function getVault() public view returns (IVault) {
return _vault;
}
/**
* @notice Returns the Authorizer
*/
function getAuthorizer() public view returns (IAuthorizer) {
return getVault().getAuthorizer();
}
function _canPerform(bytes32 actionId, address account) internal view override returns (bool) {
return getAuthorizer().canPerform(actionId, account, address(this));
}
function _canPerform(
bytes32 actionId,
address account,
address where
) internal view returns (bool) {
return getAuthorizer().canPerform(actionId, account, where);
}
}// SPDX-License-Identifier: MIT
// Based on the EnumerableSet library from OpenZeppelin Contracts, altered to remove the base private functions that
// work on bytes32, replacing them with a native implementation for address and bytes32 values, to reduce bytecode
// size and runtime costs.
// The `unchecked_at` function was also added, which allows for more gas efficient data reads in some scenarios.
pragma solidity ^0.7.0;
import "@balancer-labs/v2-interfaces/contracts/solidity-utils/helpers/BalancerErrors.sol";
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// The original OpenZeppelin implementation uses a generic Set type with bytes32 values: this was replaced with
// AddressSet, which uses address keys natively, resulting in more dense bytecode.
struct AddressSet {
// Storage of set values
address[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(address => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, if it was not already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
if (!contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// The swap is only necessary if we're not removing the last element
if (toDeleteIndex != lastIndex) {
address lastValue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastValue;
// Update the index for the moved value
set._indexes[lastValue] = toDeleteIndex + 1; // All indexes are 1-based
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
_require(set._values.length > index, Errors.OUT_OF_BOUNDS);
return unchecked_at(set, index);
}
/**
* @dev Same as {at}, except this doesn't revert if `index` it outside of the set (i.e. if it is equal or larger
* than {length}). O(1).
*
* This function performs one less storage read than {at}, but should only be used when `index` is known to be
* within bounds.
*/
// solhint-disable-next-line func-name-mixedcase
function unchecked_at(AddressSet storage set, uint256 index) internal view returns (address) {
return set._values[index];
}
function rawIndexOf(AddressSet storage set, address value) internal view returns (uint256) {
return set._indexes[value] - 1;
}
struct Bytes32Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
if (!contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// The swap is only necessary if we're not removing the last element
if (toDeleteIndex != lastIndex) {
bytes32 lastValue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastValue;
// Update the index for the moved value
set._indexes[lastValue] = toDeleteIndex + 1; // All indexes are 1-based
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
_require(set._values.length > index, Errors.OUT_OF_BOUNDS);
return unchecked_at(set, index);
}
/**
* @dev Same as {at}, except this doesn't revert if `index` it outside of the set (i.e. if it is equal or larger
* than {length}). O(1).
*
* This function performs one less storage read than {at}, but should only be used when `index` is known to be
* within bounds.
*/
// solhint-disable-next-line func-name-mixedcase
function unchecked_at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return set._values[index];
}
function rawIndexOf(Bytes32Set storage set, bytes32 value) internal view returns (uint256) {
return set._indexes[value] - 1;
}
}{
"optimizer": {
"enabled": true,
"runs": 9999
},
"outputSelection": {
"*": {
"*": [
"evm.bytecode",
"evm.deployedBytecode",
"devdoc",
"userdoc",
"metadata",
"abi"
]
}
},
"libraries": {}
}Contract Security Audit
- No Contract Security Audit Submitted- Submit Audit Here
Contract ABI
API[{"inputs":[{"internalType":"contract IVault","name":"vault","type":"address"},{"internalType":"address[]","name":"initialFactories","type":"address[]"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"factory","type":"address"}],"name":"addPoolFactory","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"pool","type":"address"}],"name":"enableRecoveryMode","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"getActionId","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getAuthorizer","outputs":[{"internalType":"contract IAuthorizer","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getFactoryAtIndex","outputs":[{"internalType":"contract IBasePoolFactory","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getFactoryCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getVault","outputs":[{"internalType":"contract IVault","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"pool","type":"address"}],"name":"isPoolFromKnownFactory","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"factory","type":"address"}],"name":"removePoolFactory","outputs":[],"stateMutability":"nonpayable","type":"function"}]Contract Creation Code
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
Deployed Bytecode
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
Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)
000000000000000000000000ba12222222228d8ba445958a75a0704d566bf2c800000000000000000000000000000000000000000000000000000000000000400000000000000000000000000000000000000000000000000000000000000002000000000000000000000000f145cafb67081895ee80eb7c04a30cf87f07b745000000000000000000000000ad901309d9e9dbc5df19c84f729f429f0189a633
-----Decoded View---------------
Arg [0] : vault (address): 0xBA12222222228d8Ba445958a75a0704d566BF2C8
Arg [1] : initialFactories (address[]): 0xf145caFB67081895EE80eB7c04A30Cf87f07b745,0xad901309d9e9DbC5Df19c84f729f429F0189a633
-----Encoded View---------------
5 Constructor Arguments found :
Arg [0] : 000000000000000000000000ba12222222228d8ba445958a75a0704d566bf2c8
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000040
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000002
Arg [3] : 000000000000000000000000f145cafb67081895ee80eb7c04a30cf87f07b745
Arg [4] : 000000000000000000000000ad901309d9e9dbc5df19c84f729f429f0189a633
Loading...
Loading
Loading...
Loading
Multichain Portfolio | 35 Chains
| Chain | Token | Portfolio % | Price | Amount | Value |
|---|---|---|---|---|---|
| ETH | 100.00% | $1.43 | 12,708.1395 | $18,172.64 |
Loading...
Loading
Loading...
Loading
A contract address hosts a smart contract, which is a set of code stored on the blockchain that runs when predetermined conditions are met. Learn more about addresses in our Knowledge Base.