Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: gpl-3.0
pragma solidity ^0.8.0;

import "../external/openzeppelin/contracts/access/Ownable.sol";
import "../external/openzeppelin/contracts/token/ERC20/IERC20.sol";
import "../external/openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

import "../external/openzeppelin/contracts/utils/math/Math.sol";
import "../external/openzeppelin/contracts/utils/math/SafeMath.sol";
import "../interfaces/IExtraInterestBearingToken.sol";
import "../interfaces/IStakingRewards.sol";

contract StakingRewards is Ownable, IStakingRewards {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;
    IERC20 public immutable stakedToken;
    address public immutable lendingPool;

    address[] public rewardTokens;

    mapping(address => bool) public inRewardsTokenList;

    uint256 public totalStaked;

    mapping(address => Reward) public rewardData;
    mapping(address => uint256) public balanceOf;

    mapping(address => mapping(address => uint256))
        public userRewardPerTokenPaid;
    mapping(address => mapping(address => uint256)) public userRewardsClaimable;

    uint internal _unlocked = 1;

    modifier nonReentrant() {
        require(_unlocked == 1, "reentrant call");
        _unlocked = 2;
        _;
        _unlocked = 1;
    }

    modifier onlyLendingPool() {
        require(lendingPool == msg.sender);
        _;
    }

    modifier updateReward(address user) {
        for (uint i; i < rewardTokens.length; i++) {
            address rewardToken = rewardTokens[i];
            rewardData[rewardToken].rewardPerTokenStored = rewardPerToken(
                rewardToken
            );
            rewardData[rewardToken].lastUpdateTime = Math.min(
                rewardData[rewardToken].endTime,
                block.timestamp
            );

            if (user != address(0)) {
                userRewardsClaimable[user][rewardToken] = earned(
                    user,
                    rewardToken,
                    rewardData[rewardToken].rewardPerTokenStored
                );
                userRewardPerTokenPaid[user][rewardToken] = rewardData[
                    rewardToken
                ].rewardPerTokenStored;
            }
        }
        _;
    }

    /// @notice This contract must be create in lendingPool's `initReserve()`
    constructor(address _stakingToken) {
        stakedToken = IERC20(_stakingToken);
        lendingPool = msg.sender;
    }

    function rewardPerToken(address rewardToken) public view returns (uint) {
        if (block.timestamp <= rewardData[rewardToken].startTime) {
            // new rewards not start
            return rewardData[rewardToken].rewardPerTokenStored;
        }

        uint256 dt = Math.min(
            rewardData[rewardToken].endTime,
            block.timestamp
        ) - (rewardData[rewardToken].lastUpdateTime);

        if (dt == 0 || totalStaked == 0) {
            return rewardData[rewardToken].rewardPerTokenStored;
        }

        return
            rewardData[rewardToken].rewardPerTokenStored +
            (rewardData[rewardToken].rewardRate * dt * 1e18) /
            totalStaked;
    }

    function earned(
        address user,
        address rewardToken
    ) public view returns (uint) {
        uint256 curRewardPerToken = rewardPerToken(rewardToken);

        return earned(user, rewardToken, curRewardPerToken);
    }

    function earned(
        address user,
        address rewardToken,
        uint256 curRewardPerToken
    ) internal view returns (uint) {
        uint256 d = curRewardPerToken -
            userRewardPerTokenPaid[user][rewardToken];

        return
            (balanceOf[user] * d) /
            1e18 +
            userRewardsClaimable[user][rewardToken];
    }

    function setReward(
        address rewardToken,
        uint256 startTime,
        uint256 endTime,
        uint256 totalRewards
    ) public onlyOwner nonReentrant updateReward(address(0)) {
        require(startTime < endTime, "start must lt end");
        require(rewardData[rewardToken].endTime < block.timestamp, "not end");

        if (!inRewardsTokenList[rewardToken]) {
            rewardTokens.push(rewardToken);
            inRewardsTokenList[rewardToken] = true;
        }

        rewardData[rewardToken].startTime = startTime;
        rewardData[rewardToken].endTime = endTime;
        rewardData[rewardToken].lastUpdateTime = block.timestamp;
        rewardData[rewardToken].rewardRate =
            totalRewards /
            (endTime - startTime);

        if (block.timestamp > startTime && totalStaked > 0) {
            uint256 dt = block.timestamp - startTime;

            rewardData[rewardToken].rewardPerTokenStored +=
                (rewardData[rewardToken].rewardRate * dt * 1e18) /
                totalStaked;
        }

        if (block.timestamp > startTime && totalStaked == 0) {
            // If this happens, there is no staked tokens from startTime to now
            // The rewards in this period should be removed
            uint256 dt = block.timestamp - startTime;
            totalRewards -= rewardData[rewardToken].rewardRate * dt;
        }

        IERC20(rewardToken).safeTransferFrom(
            msg.sender,
            address(this),
            totalRewards
        );

        emit RewardsSet(rewardToken, startTime, endTime, totalRewards);
    }

    /**
     * @dev Stake `amount` of assets to this contract
     * @param amount The amount of assets to be staked
     * @param onBehalfOf The address that will receive the staked position, same as msg.sender if the user
     *   wants to receive them on his own wallet.
     **/
    function stake(
        uint amount,
        address onBehalfOf
    ) external nonReentrant updateReward(onBehalfOf) {
        require(amount > 0, "amount = 0");

        stakedToken.safeTransferFrom(msg.sender, address(this), amount);

        balanceOf[onBehalfOf] += amount;
        totalStaked += amount;

        emit Staked(msg.sender, onBehalfOf, amount);
    }

    /**
     * @dev Withdraw `amount` of staked assets
     * @param amount The amount of assets to withdraw
     * @param to The address that will receive the staked assets, same as msg.sender if the user
     *   wants to receive them on his own wallet.
     **/
    function withdraw(
        uint amount,
        address to
    ) external nonReentrant updateReward(msg.sender) {
        require(amount > 0, "amount = 0");

        balanceOf[msg.sender] -= amount;
        totalStaked -= amount;

        require(stakedToken.transfer(to, amount), "transfer failed");

        emit Withdraw(msg.sender, to, amount);
    }

    /**
     * @dev Withdraw `amount` of staked assets called by lendingPool
     * only lendingPool can call this function in `unstakeAndWithdraw()` of LendingPool
     * @param amount The amount of assets to withdraw
     * @param user The user of the staked position
     * @param to The address that will receive the staked assets, same as msg.sender if the user
     *   wants to receive them on his own wallet.
     **/
    function withdrawByLendingPool(
        uint amount,
        address user,
        address to
    ) external onlyLendingPool nonReentrant updateReward(user) {
        require(amount > 0, "amount = 0");

        balanceOf[user] -= amount;
        totalStaked -= amount;

        require(stakedToken.transfer(to, amount), "transfer falied");

        emit Withdraw(user, to, amount);
    }

    function claim() external nonReentrant updateReward(msg.sender) {
        for (uint i = 0; i < rewardTokens.length; i++) {
            address rewardToken = rewardTokens[i];
            uint256 claimable = userRewardsClaimable[msg.sender][rewardToken];
            if (claimable > 0) {
                userRewardsClaimable[msg.sender][rewardToken] = 0;
                require(
                    IERC20(rewardToken).transfer(msg.sender, claimable),
                    "transfer failed"
                );
                emit RewardPaid(msg.sender, rewardToken, claimable);
            }
        }
    }

    function update() external updateReward(address(0)) onlyOwner {}

    function rewardsTokenListLength() external view returns (uint256) {
        return rewardTokens.length;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(
        address owner,
        address spender
    ) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transfer.selector, to, value)
        );
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
        );
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.approve.selector, spender, value)
        );
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(
                oldAllowance >= value,
                "SafeERC20: decreased allowance below zero"
            );
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(
                token,
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    newAllowance
                )
            );
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(
            nonceAfter == nonceBefore + 1,
            "SafeERC20: permit did not succeed"
        );
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(
            data,
            "SafeERC20: low-level call failed"
        );
        if (returndata.length > 0) {
            // Return data is optional
            require(
                abi.decode(returndata, (bool)),
                "SafeERC20: ERC20 operation did not succeed"
            );
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                0,
                "Address: low-level call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        (bool success, bytes memory returndata) = target.call{value: value}(
            data
        );
        return
            verifyCallResultFromTarget(
                target,
                success,
                returndata,
                errorMessage
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data
    ) internal view returns (bytes memory) {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return
            verifyCallResultFromTarget(
                target,
                success,
                returndata,
                errorMessage
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data
    ) internal returns (bytes memory) {
        return
            functionDelegateCall(
                target,
                data,
                "Address: low-level delegate call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return
            verifyCallResultFromTarget(
                target,
                success,
                returndata,
                errorMessage
            );
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(
        bytes memory returndata,
        string memory errorMessage
    ) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(
        uint256 a,
        Rounding rounding
    ) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return
                result +
                (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(
        uint256 value,
        Rounding rounding
    ) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return
                result +
                (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(
        uint256 value,
        Rounding rounding
    ) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return
                result +
                (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(
        uint256 value,
        Rounding rounding
    ) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return
                result +
                (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(
        uint256 a,
        uint256 b
    ) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(
        uint256 a,
        uint256 b
    ) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(
        uint256 a,
        uint256 b
    ) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(
        uint256 a,
        uint256 b
    ) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(
        uint256 a,
        uint256 b
    ) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: gpl-3.0
pragma solidity ^0.8.0;

import "../external/openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IExtraInterestBearingToken is IERC20 {
    /**
     * @dev Emitted after the mint action
     * @param to The address receive tokens
     * @param value The amount being
     **/
    event Mint(address indexed to, uint256 value);

    /**
     * @dev Mints `amount` eTokens to `user`
     * @param user The address receiving the minted tokens
     * @param amount The amount of tokens getting minted
     */
    function mint(address user, uint256 amount) external;

    /**
     * @dev Emitted after eTokens are burned
     * @param from The owner of the eTokens, getting them burned
     * @param target The address that will receive the underlying tokens
     * @param eTokenAmount The amount being burned
     * @param underlyingTokenAmount The amount of underlying tokens being transferred to user
     **/
    event Burn(
        address indexed from,
        address indexed target,
        uint256 eTokenAmount,
        uint256 underlyingTokenAmount
    );

    /**
     * @dev Burns eTokens from `user` and sends the underlying tokens to `receiverOfUnderlying`
     * Can only be called by the lending pool;
     * The `underlyingTokenAmount` should be calculated based on the current exchange rate in lending pool
     * @param receiverOfUnderlying The address that will receive the underlying
     * @param eTokenAmount The amount of eTokens being burned
     * @param underlyingTokenAmount The amount of underlying tokens being transferred to user
     **/
    function burn(
        address receiverOfUnderlying,
        uint256 eTokenAmount,
        uint256 underlyingTokenAmount
    ) external;

    /**
     * @dev Emitted after the minted to treasury
     * @param treasury The treasury address
     * @param value The amount being minted
     **/
    event MintToTreasury(address indexed treasury, uint256 value);

    /**
     * @dev Mints eTokens to the treasury of the reserve
     * @param treasury The address of treasury
     * @param amount The amount of ftokens getting minted
     */
    function mintToTreasury(address treasury, uint256 amount) external;

    /**
     * @dev Transfers the underlying tokens to `target`. Called by the LendingPool to transfer
     * underlying tokens to target in functions like borrow(), withdraw()
     * @param target The recipient of the eTokens
     * @param amount The amount getting transferred
     * @return The amount transferred
     **/
    function transferUnderlyingTo(
        address target,
        uint256 amount
    ) external returns (uint256);
}

// SPDX-License-Identifier: gpl-3.0
pragma solidity ^0.8.0;

import "../external/openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IStakingRewards {
    event RewardsSet(
        address rewardsToken,
        uint256 start,
        uint256 end,
        uint256 total
    );

    event Staked(
        address indexed user,
        address indexed onBehalfOf,
        uint256 amount
    );

    event Withdraw(address indexed user, address indexed to, uint256 amount);

    event RewardPaid(
        address indexed user,
        address indexed rewardsToken,
        uint256 claimed
    );

    struct Reward {
        uint256 startTime;
        uint256 endTime;
        uint256 rewardRate;
        uint256 lastUpdateTime;
        uint256 rewardPerTokenStored;
    }

    function rewardData(
        address
    ) external view returns (uint256, uint256, uint256, uint256, uint256);

    function stakedToken() external view returns (IERC20);

    function lendingPool() external view returns (address);

    function totalStaked() external view returns (uint256);

    function balanceOf(address) external view returns (uint256);

    function rewardsTokenListLength() external view returns (uint256);

    function earned(
        address _account,
        address _rewardsToken
    ) external view returns (uint256);

    function stake(uint _amount, address onBehalfOf) external;

    function withdraw(uint _amount, address to) external;

    function withdrawByLendingPool(
        uint _amount,
        address user,
        address to
    ) external;

    function claim() external;
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_stakingToken","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"rewardsToken","type":"address"},{"indexed":false,"internalType":"uint256","name":"claimed","type":"uint256"}],"name":"RewardPaid","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"rewardsToken","type":"address"},{"indexed":false,"internalType":"uint256","name":"start","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"end","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"total","type":"uint256"}],"name":"RewardsSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"onBehalfOf","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Staked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claim","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"},{"internalType":"address","name":"rewardToken","type":"address"}],"name":"earned","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"inRewardsTokenList","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lendingPool","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"rewardData","outputs":[{"internalType":"uint256","name":"startTime","type":"uint256"},{"internalType":"uint256","name":"endTime","type":"uint256"},{"internalType":"uint256","name":"rewardRate","type":"uint256"},{"internalType":"uint256","name":"lastUpdateTime","type":"uint256"},{"internalType":"uint256","name":"rewardPerTokenStored","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"rewardToken","type":"address"}],"name":"rewardPerToken","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"rewardTokens","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardsTokenListLength","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"rewardToken","type":"address"},{"internalType":"uint256","name":"startTime","type":"uint256"},{"internalType":"uint256","name":"endTime","type":"uint256"},{"internalType":"uint256","name":"totalRewards","type":"uint256"}],"name":"setReward","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"onBehalfOf","type":"address"}],"name":"stake","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"stakedToken","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalStaked","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"update","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"userRewardPerTokenPaid","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"userRewardsClaimable","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"to","type":"address"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"user","type":"address"},{"internalType":"address","name":"to","type":"address"}],"name":"withdrawByLendingPool","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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