Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: UNLICENSED
// Copyright (c) Eywa.Fi, 2021-2025 - all rights reserved
pragma solidity 0.8.17;

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "../BasePoolAdapter.sol";
import "./ICryptoPool.sol";

/**
 * @dev Specified if pool and LP is the same contract (like arbitrum 2pool).
 */
contract PoolAdapter is BasePoolAdapter {

    uint8 public immutable n;

    /**
     * @param n_ coins count. 
     */
    constructor(address addressBook_, uint8 n_) BasePoolAdapter(addressBook_) {
        require(n_ != 0, "PoolAdapter: wrong params");
        n = n_;
    }

    /**
     * @dev Adds liquidity to the pool.
     *
     * @param tokenIn The address of the input token to add liquidity;
     * @param amountIn The amount of input token to add as liquidity;
     * @param to Address where the LP tokens will be transferred;
     * @param pool Address of the pool contract;
     * @param minAmountOut The minimum amount of pool tokens expected to be received;
     * @param i Index of the input token;
     * @param emergencyTo Emergency to address in case of inconsistency.
     */
    function addLiquidity(
        address tokenIn,
        uint256 amountIn,
        address to,
        address pool,
        uint256 minAmountOut,
        uint8 i,
        address emergencyTo
    ) external onlyRouter returns (uint256 amountOut) {
        ICryptoPool poolImpl = ICryptoPool(pool);
        require(tokenIn == poolImpl.coins(i), "PoolAdapter: wrong params");
        IERC20 erc20Impl = IERC20(tokenIn);
        amountIn = _subtractFee(pool, amountIn);
        uint256 minAmount;
        if (n == 2) {
            uint256[2] memory amounts;
            amounts[i] = amountIn;
            minAmount = poolImpl.calc_token_amount(amounts, true);
            if (minAmountOut > minAmount) {
                SafeERC20.safeTransfer(erc20Impl, emergencyTo, amountIn);
                return 0;
            }
            SafeERC20.safeIncreaseAllowance(erc20Impl, pool, amountIn);
            amountOut = poolImpl.add_liquidity(amounts, 0, to);
        } else if (n == 3) {
            uint256[3] memory amounts;
            amounts[i] = amountIn;
            minAmount = poolImpl.calc_token_amount(amounts, true);
            if (minAmountOut > minAmount) {
                SafeERC20.safeTransfer(erc20Impl, emergencyTo, amountIn);
                return 0;
            }
            SafeERC20.safeIncreaseAllowance(erc20Impl, pool, amountIn);
            amountOut = poolImpl.add_liquidity(amounts, 0, to);
        }
        if (amountOut == 0) {
            return 0;
        }
        require(amountOut >= minAmountOut, "PoolAdapter: min amount");
    }

    /**
     * @dev Swaps tokens in the pool.
     *
     * @param tokenIn The address of the input token to swap liquidity;
     * @param amountIn The amount of input token to be exchanged;
     * @param to Address where the output tokens will be transferred;
     * @param pool Address of the pool contract;
     * @param minAmountOut Minimum amount of coin to receive;
     * @param i Index of the input token;
     * @param j Index of the output token;
     * @param emergencyTo Emergency to address in case of inconsistency.
     */
    function swap(
        address tokenIn,
        uint256 amountIn,
        address to,
        address pool,
        uint256 minAmountOut,
        uint8 i,
        uint8 j,
        address emergencyTo
    ) external onlyRouter returns (uint256 amountOut) {
        ICryptoPool poolImpl = ICryptoPool(pool);
        require(tokenIn == poolImpl.coins(i), "PoolAdapter: wrong params");
        IERC20 erc20Impl = IERC20(tokenIn);
        amountIn = _subtractFee(pool, amountIn);
        uint256 minDy = poolImpl.get_dy(uint256(i), uint256(j), amountIn);
        if (minAmountOut > minDy) {
            SafeERC20.safeTransfer(erc20Impl, emergencyTo, amountIn);
            return 0;
        }
        SafeERC20.safeIncreaseAllowance(erc20Impl, pool, amountIn);
        amountOut = poolImpl.exchange(uint256(i), uint256(j), amountIn, minAmountOut, to);
    }

    /**
     * @dev Removes liquidity from the pool.
     *
     * @param tokenIn The address of the input token to remove liquidity;
     * @param amountIn The amount of the lp to be removed;
     * @param to Address where the output token will be transferred;
     * @param pool Address of the pool contract;
     * @param minAmountOut Minimum amount of coin to receive;
     * @param j Index value of the coin to withdraw;
     * @param emergencyTo Emergency to address in case of inconsistency.
     */
    function removeLiquidity(
        address tokenIn,
        uint256 amountIn,
        address to,
        address pool,
        uint256 minAmountOut,
        uint8 j,
        address emergencyTo
    ) external onlyRouter returns (uint256 amountOut) {
        require(tokenIn == pool, "PoolAdapter: wrong params");
        ICryptoPool poolImpl = ICryptoPool(pool);
        amountIn = _subtractFee(pool, amountIn);
        uint256 minAmount = poolImpl.calc_withdraw_one_coin(amountIn, uint256(j));
        if (minAmountOut > minAmount) {
            SafeERC20.safeTransfer(IERC20(pool), emergencyTo, amountIn);
            return 0;
        }
        // burnFrom used for this lp, increase allowance not needed
        amountOut = poolImpl.remove_liquidity_one_coin(amountIn, uint256(j), minAmountOut, to);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/AccessControl.sol)

pragma solidity ^0.8.0;

import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `_msgSender()` is missing `role`.
     * Overriding this function changes the behavior of the {onlyRole} modifier.
     *
     * Format of the revert message is described in {_checkRole}.
     *
     * _Available since v4.6._
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(account),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * May emit a {RoleGranted} event.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControlEnumerable.sol";
import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
    using EnumerableSet for EnumerableSet.AddressSet;

    mapping(bytes32 => EnumerableSet.AddressSet) private _roleMembers;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view virtual override returns (address) {
        return _roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view virtual override returns (uint256) {
        return _roleMembers[role].length();
    }

    /**
     * @dev Overload {_grantRole} to track enumerable memberships
     */
    function _grantRole(bytes32 role, address account) internal virtual override {
        super._grantRole(role, account);
        _roleMembers[role].add(account);
    }

    /**
     * @dev Overload {_revokeRole} to track enumerable memberships
     */
    function _revokeRole(bytes32 role, address account) internal virtual override {
        super._revokeRole(role, account);
        _roleMembers[role].remove(account);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControl.sol";

/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerable is IAccessControl {
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) external view returns (address);

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";
import "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: UNLICENSED
// Copyright (c) Eywa.Fi, 2021-2025 - all rights reserved
pragma solidity 0.8.17;

import "@openzeppelin/contracts/access/AccessControlEnumerable.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "../EndPoint.sol";
import {IBasePoolAdapter} from "../interfaces/IBasePoolAdapter.sol";
import {IAddressBook} from "../interfaces/IAddressBook.sol";

abstract contract BasePoolAdapter is IBasePoolAdapter, EndPoint, AccessControlEnumerable {

    /// @notice The operator role id.
    /// @dev Only the operator can set the default fee value.
    bytes32 public constant OPERATOR_ROLE = keccak256("OPERATOR_ROLE");

    /// @notice The accountant role id.
    /// @dev Only the accountant can withdraw fee.
    bytes32 public constant ACCOUNTANT_ROLE = keccak256("ACCOUNTANT_ROLE");

    /// @inheritdoc IBasePoolAdapter
    uint256 public constant FEE_DENOMINATOR = 1000000;

    /// @inheritdoc IBasePoolAdapter
    uint256 public constant MAX_FEE = 100000;

    /// @notice The default fee value.
    /// @dev The value of the fee charged by the adapter for making operations.
    /// Default fee value is used if the fee is not explicitly set.
    uint256 public defaultFee;

    /// @notice The Router contract address.
    /// @dev Only the router contract should call the `add()`, `swap()`, and `remove()` functions of the adapters.
    address public router;

    /// @notice The fee value for specific pool.
    /// @dev The value of the fee charged by the adapter for making operations.
    mapping(address => uint256) public feeByPool;

    /// @notice The modifier to verify that the function is called from the router contract.
    /// @dev This modifier should be used in the `add()`, `swap()`, and `remove()` functions of the adapters.
    modifier onlyRouter() {
        require(msg.sender == router, "BasePoolAdapter: caller isn't Router");
        _;
    }

    /// @notice Contract constructor.
    /// @dev Sets the AddressBook contract address and default administrator role.
    /// @param addressBook_ the AddressBook contract address.
    constructor(address addressBook_) EndPoint(addressBook_) {
        _grantRole(DEFAULT_ADMIN_ROLE, msg.sender);
        _resetRouter();
    }

    /// @notice Setting the AddressBook contract address.
    /// @dev Only an account with the DEFAULT_ADMIN_ROLE role can set the value.
    /// @param addressBook_ the AddressBook contract address.
    function setAddressBook(address addressBook_) external onlyRole(DEFAULT_ADMIN_ROLE) {
        _setAddressBook(addressBook_);
    }

    /// @notice The function reset the router contract address from the addressbook contract.
    /// @dev Only an account with the DEFAULT_ADMIN_ROLE role can set the value.
    function resetRouter() external onlyRole(DEFAULT_ADMIN_ROLE) {
        _resetRouter();
    }

    /// @notice Setting the default fee value.
    /// @dev Only an account with the OPERATOR_ROLE role can set the value.
    /// @param defaultFee_ the default fee value.
    function setDefaultFee(uint256 defaultFee_) external onlyRole(OPERATOR_ROLE) {
        require(defaultFee_ <= MAX_FEE, "BasePoolAdapter: the value of the fee is too high");
        defaultFee = defaultFee_;
    }

    /// @inheritdoc IBasePoolAdapter
    function setFee(address pool_, uint256 fee_) external {
        require(
            msg.sender == IAddressBook(addressBook).whitelist() || hasRole(OPERATOR_ROLE, msg.sender),
            "BasePoolAdapter: caller isn't a Whitelist contract and does't have the OPERATOR_ROLE"
        );
        _setFee(pool_, fee_);
    } 

    /// @notice Withdrawal of fee from the Adapter contract to the Treasury contract for specific tokens.
    /// @dev The function outputs all the fee accumulated on the Adapter contract to the Treasury contract.
    /// Only an account with the ACCOUNTANT_ROLE role can set the value.
    /// @param tokens_ An array of token addresses.
    function withdraw(address[] calldata tokens_) external onlyRole(ACCOUNTANT_ROLE) {
        address treasury = IAddressBook(addressBook).treasury();
        for (uint256 i = 0; i < tokens_.length; i++) {
            IERC20 token = IERC20(tokens_[i]);
            SafeERC20.safeTransfer(token, treasury, token.balanceOf(address(this)));
        }
    }

    /// @inheritdoc IBasePoolAdapter
    function fee(address pool_) public view returns(uint256) {
        return _fee(pool_);
    }

    /// @notice The function reset the router contract address from the addressbook contract.
    function _resetRouter() internal {
        router = IAddressBook(addressBook).router(uint64(block.chainid));
    }

    /// @notice Setting the fee value for specific pool.
    /// @dev A check is performed that the fee is not greater than the MAX_FEE,
    /// except for the case of setting the fee to an obvious zero (max uint256)
    /// @param pool_ the pool contract address.
    /// @param fee_ the fee value.
    function _setFee(address pool_, uint256 fee_) internal {
        require(fee_ <= MAX_FEE || fee_ == type(uint256).max, "BasePoolAdapter: the value of the fee is too high");
        feeByPool[pool_] = fee_;
    }

    /// @notice Returns the current value of the fee for specific pool.
    /// @dev If the fee is set explicitly, its value is returned.
    /// If the fee is not set explicitly, the default fee value is returned.
    /// If fee value is set to maximum - it is considered as zero fee
    /// @param pool_ the pool address.
    /// @return The the current fee value.
    function _fee(address pool_) internal view returns(uint256) {
        uint256 currentFee = feeByPool[pool_];
        if (currentFee == 0) { 
            currentFee = defaultFee;
        } else if (currentFee == type(uint256).max) {
            currentFee = 0;
        }
        return currentFee;
    }

    /// @notice returns the value of tokens to execute the operations minus the fee for specific pool.
    /// @dev The value of tokens for the operation is calculated based on the current value of the fee.
    /// @param pool_ the pool address.
    /// @param amount_ the value of tokens.
    /// @return result_ the value of tokens minus the fee.
    function _subtractFee(address pool_, uint256 amount_) internal view returns(uint256 result_) {
        result_ = amount_;
        uint256 fee_ = _fee(pool_);
        if (fee_ != 0) {
            result_ = amount_ - amount_ * fee_ / FEE_DENOMINATOR;
        }
    }
}

// SPDX-License-Identifier: UNLICENSED
// Copyright (c) Eywa.Fi, 2021-2025 - all rights reserved
pragma solidity 0.8.17;

interface ICryptoPool {
    function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount, address receiver) external returns (uint256);

    function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount, address receiver) external returns (uint256);

    function remove_liquidity_one_coin(uint256 token_amount, uint256 i, uint256 min_amount, address receiver) external returns (uint256);

    function exchange(uint256 i, uint256 j, uint256 dx, uint256 min_dy, address receiver) external returns (uint256);

    function get_dy(uint256 i, uint256 j, uint256 dx) external view returns (uint256);

    function calc_withdraw_one_coin(uint256 token_amount, uint256 i) external view returns (uint256);

    function calc_token_amount(uint256[2] memory amounts, bool is_deposit) external view returns (uint256);

    function calc_token_amount(uint256[3] memory amounts, bool is_deposit) external view returns (uint256);

    function coins(uint256 i) external view returns (address);
}

// SPDX-License-Identifier: UNLICENSED
// Copyright (c) Eywa.Fi, 2021-2023 - all rights reserved
pragma solidity 0.8.17;

import "./utils/Typecast.sol";


contract EndPoint is Typecast {

    /// @dev version
    string public version;
    /// @dev clp address book
    address public addressBook;

    constructor (address addressBook_) {
        version = "2.2.3";
        _checkAddress(addressBook_);
        addressBook = addressBook_;
    }

    function _setAddressBook(address addressBook_) internal {
        _checkAddress(addressBook_);
        addressBook = addressBook_;
    }

    function _checkAddress(address checkingAddress) private pure {
        require(checkingAddress != address(0), "EndPoint: zero address");
    }
}

// SPDX-License-Identifier: UNLICENSED
// Copyright (c) Eywa.Fi, 2021-2024 - all rights reserved
pragma solidity 0.8.17;


interface IAddressBook {
    /// @dev returns portal by given chainId
    function portal(uint64 chainId) external view returns (address);

    /// @dev returns synthesis by given chainId
    function synthesis(uint64 chainId) external view returns (address);

    /// @dev returns router by given chainId
    function router(uint64 chainId) external view returns (address);

    /// @dev returns whitelist
    function whitelist() external view returns (address);

    /// @dev returns treasury
    function treasury() external view returns (address);

    /// @dev returns gateKeeper
    function gateKeeper() external view returns (address);

    /// @dev returns bridge
    function bridge() external view returns (address);

    /// @dev returns opsRegistrar
    function opsRegistrar() external view returns (address);

    /// @dev returns wrapped native asset (WETH)
    function WETH() external view returns (address);
}

// SPDX-License-Identifier: UNLICENSED
// Copyright (c) Eywa.Fi, 2021-2025 - all rights reserved
pragma solidity 0.8.17;

interface IBasePoolAdapter {

    /// @notice Returns the fee denominator constant.
    /// @dev Fee denominator constant used for percentage calculations.
    /// @return The fee denominator constant.
    function FEE_DENOMINATOR() external view returns (uint256);

    /// @notice Returns the max fee constant.
    /// @dev The maximum commission value that can be set is 100000, which corresponds to 10 %.
    /// @return The max fee constant.
    function MAX_FEE() external view returns (uint256);

    /// @notice Setting the fee value for specific pool.
    /// @dev You can only set the fee value by calling from the Whitelist contract
    /// or an account with the OPERATOR_ROLE role.
    /// @param pool_ the pool contract address.
    /// @param fee_ the fee value.
    function setFee(address pool_, uint256 fee_) external;

    /// @notice Returns the current value of the fee for specific pool.
    /// @dev If the fee is set explicitly, its value is returned.
    /// If the fee is not set explicitly, the default fee value is returned.
    /// If fee value is set to maximum - it is considered as zero fee
    /// @param pool_ the pool address.
    /// @return The the current fee value.
    function fee(address pool_) external view returns(uint256);
}

// SPDX-License-Identifier: UNLICENSED
// Copyright (c) Eywa.Fi, 2021-2023 - all rights reserved
pragma solidity 0.8.17;


abstract contract Typecast {
    function castToAddress(bytes32 x) public pure returns (address) {
        return address(uint160(uint256(x)));
    }

    function castToBytes32(address a) public pure returns (bytes32) {
        return bytes32(uint256(uint160(a)));
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"addressBook_","type":"address"},{"internalType":"uint8","name":"n_","type":"uint8"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"inputs":[],"name":"ACCOUNTANT_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"FEE_DENOMINATOR","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_FEE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"OPERATOR_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"uint256","name":"amountIn","type":"uint256"},{"internalType":"address","name":"to","type":"address"},{"internalType":"address","name":"pool","type":"address"},{"internalType":"uint256","name":"minAmountOut","type":"uint256"},{"internalType":"uint8","name":"i","type":"uint8"},{"internalType":"address","name":"emergencyTo","type":"address"}],"name":"addLiquidity","outputs":[{"internalType":"uint256","name":"amountOut","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"addressBook","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"x","type":"bytes32"}],"name":"castToAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"address","name":"a","type":"address"}],"name":"castToBytes32","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"defaultFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"pool_","type":"address"}],"name":"fee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"feeByPool","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getRoleMember","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleMemberCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"n","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"uint256","name":"amountIn","type":"uint256"},{"internalType":"address","name":"to","type":"address"},{"internalType":"address","name":"pool","type":"address"},{"internalType":"uint256","name":"minAmountOut","type":"uint256"},{"internalType":"uint8","name":"j","type":"uint8"},{"internalType":"address","name":"emergencyTo","type":"address"}],"name":"removeLiquidity","outputs":[{"internalType":"uint256","name":"amountOut","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"resetRouter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"router","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"addressBook_","type":"address"}],"name":"setAddressBook","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"defaultFee_","type":"uint256"}],"name":"setDefaultFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"pool_","type":"address"},{"internalType":"uint256","name":"fee_","type":"uint256"}],"name":"setFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"uint256","name":"amountIn","type":"uint256"},{"internalType":"address","name":"to","type":"address"},{"internalType":"address","name":"pool","type":"address"},{"internalType":"uint256","name":"minAmountOut","type":"uint256"},{"internalType":"uint8","name":"i","type":"uint8"},{"internalType":"uint8","name":"j","type":"uint8"},{"internalType":"address","name":"emergencyTo","type":"address"}],"name":"swap","outputs":[{"internalType":"uint256","name":"amountOut","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"version","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"tokens_","type":"address[]"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

00000000000000000000000078c9730279b3256655fec668644ba9e97e4610050000000000000000000000000000000000000000000000000000000000000003

-----Decoded View---------------
Arg [0] : addressBook_ (address): 0x78C9730279b3256655FeC668644bA9e97e461005
Arg [1] : n_ (uint8): 3

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 00000000000000000000000078c9730279b3256655fec668644ba9e97e461005
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000003