Contract Source Code:
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IOAppCore, ILayerZeroEndpointV2 } from "./interfaces/IOAppCore.sol";
/**
* @title OAppCore
* @dev Abstract contract implementing the IOAppCore interface with basic OApp configurations.
*/
abstract contract OAppCore is IOAppCore, Ownable {
// The LayerZero endpoint associated with the given OApp
ILayerZeroEndpointV2 public immutable endpoint;
// Mapping to store peers associated with corresponding endpoints
mapping(uint32 eid => bytes32 peer) public peers;
/**
* @dev Constructor to initialize the OAppCore with the provided endpoint and delegate.
* @param _endpoint The address of the LOCAL Layer Zero endpoint.
* @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
*
* @dev The delegate typically should be set as the owner of the contract.
*/
constructor(address _endpoint, address _delegate) {
endpoint = ILayerZeroEndpointV2(_endpoint);
if (_delegate == address(0)) revert InvalidDelegate();
endpoint.setDelegate(_delegate);
}
/**
* @notice Sets the peer address (OApp instance) for a corresponding endpoint.
* @param _eid The endpoint ID.
* @param _peer The address of the peer to be associated with the corresponding endpoint.
*
* @dev Only the owner/admin of the OApp can call this function.
* @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
* @dev Set this to bytes32(0) to remove the peer address.
* @dev Peer is a bytes32 to accommodate non-evm chains.
*/
function setPeer(uint32 _eid, bytes32 _peer) public virtual onlyOwner {
_setPeer(_eid, _peer);
}
/**
* @notice Sets the peer address (OApp instance) for a corresponding endpoint.
* @param _eid The endpoint ID.
* @param _peer The address of the peer to be associated with the corresponding endpoint.
*
* @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
* @dev Set this to bytes32(0) to remove the peer address.
* @dev Peer is a bytes32 to accommodate non-evm chains.
*/
function _setPeer(uint32 _eid, bytes32 _peer) internal virtual {
peers[_eid] = _peer;
emit PeerSet(_eid, _peer);
}
/**
* @notice Internal function to get the peer address associated with a specific endpoint; reverts if NOT set.
* ie. the peer is set to bytes32(0).
* @param _eid The endpoint ID.
* @return peer The address of the peer associated with the specified endpoint.
*/
function _getPeerOrRevert(uint32 _eid) internal view virtual returns (bytes32) {
bytes32 peer = peers[_eid];
if (peer == bytes32(0)) revert NoPeer(_eid);
return peer;
}
/**
* @notice Sets the delegate address for the OApp.
* @param _delegate The address of the delegate to be set.
*
* @dev Only the owner/admin of the OApp can call this function.
* @dev Provides the ability for a delegate to set configs, on behalf of the OApp, directly on the Endpoint contract.
*/
function setDelegate(address _delegate) public onlyOwner {
endpoint.setDelegate(_delegate);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { MessagingParams, MessagingFee, MessagingReceipt } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
import { OAppCore } from "./OAppCore.sol";
/**
* @title OAppSender
* @dev Abstract contract implementing the OAppSender functionality for sending messages to a LayerZero endpoint.
*/
abstract contract OAppSender is OAppCore {
using SafeERC20 for IERC20;
// Custom error messages
error NotEnoughNative(uint256 msgValue);
error LzTokenUnavailable();
// @dev The version of the OAppSender implementation.
// @dev Version is bumped when changes are made to this contract.
uint64 internal constant SENDER_VERSION = 1;
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol contract.
* @return receiverVersion The version of the OAppReceiver.sol contract.
*
* @dev Providing 0 as the default for OAppReceiver version. Indicates that the OAppReceiver is not implemented.
* ie. this is a SEND only OApp.
* @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct versions
*/
function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
return (SENDER_VERSION, 0);
}
/**
* @dev Internal function to interact with the LayerZero EndpointV2.quote() for fee calculation.
* @param _dstEid The destination endpoint ID.
* @param _message The message payload.
* @param _options Additional options for the message.
* @param _payInLzToken Flag indicating whether to pay the fee in LZ tokens.
* @return fee The calculated MessagingFee for the message.
* - nativeFee: The native fee for the message.
* - lzTokenFee: The LZ token fee for the message.
*/
function _quote(
uint32 _dstEid,
bytes memory _message,
bytes memory _options,
bool _payInLzToken
) internal view virtual returns (MessagingFee memory fee) {
return
endpoint.quote(
MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _payInLzToken),
address(this)
);
}
/**
* @dev Internal function to interact with the LayerZero EndpointV2.send() for sending a message.
* @param _dstEid The destination endpoint ID.
* @param _message The message payload.
* @param _options Additional options for the message.
* @param _fee The calculated LayerZero fee for the message.
* - nativeFee: The native fee.
* - lzTokenFee: The lzToken fee.
* @param _refundAddress The address to receive any excess fee values sent to the endpoint.
* @return receipt The receipt for the sent message.
* - guid: The unique identifier for the sent message.
* - nonce: The nonce of the sent message.
* - fee: The LayerZero fee incurred for the message.
*/
function _lzSend(
uint32 _dstEid,
bytes memory _message,
bytes memory _options,
MessagingFee memory _fee,
address _refundAddress
) internal virtual returns (MessagingReceipt memory receipt) {
// @dev Push corresponding fees to the endpoint, any excess is sent back to the _refundAddress from the endpoint.
uint256 messageValue = _payNative(_fee.nativeFee);
if (_fee.lzTokenFee > 0) _payLzToken(_fee.lzTokenFee);
return
// solhint-disable-next-line check-send-result
endpoint.send{ value: messageValue }(
MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _fee.lzTokenFee > 0),
_refundAddress
);
}
/**
* @dev Internal function to pay the native fee associated with the message.
* @param _nativeFee The native fee to be paid.
* @return nativeFee The amount of native currency paid.
*
* @dev If the OApp needs to initiate MULTIPLE LayerZero messages in a single transaction,
* this will need to be overridden because msg.value would contain multiple lzFees.
* @dev Should be overridden in the event the LayerZero endpoint requires a different native currency.
* @dev Some EVMs use an ERC20 as a method for paying transactions/gasFees.
* @dev The endpoint is EITHER/OR, ie. it will NOT support both types of native payment at a time.
*/
function _payNative(uint256 _nativeFee) internal virtual returns (uint256 nativeFee) {
if (msg.value != _nativeFee) revert NotEnoughNative(msg.value);
return _nativeFee;
}
/**
* @dev Internal function to pay the LZ token fee associated with the message.
* @param _lzTokenFee The LZ token fee to be paid.
*
* @dev If the caller is trying to pay in the specified lzToken, then the lzTokenFee is passed to the endpoint.
* @dev Any excess sent, is passed back to the specified _refundAddress in the _lzSend().
*/
function _payLzToken(uint256 _lzTokenFee) internal virtual {
// @dev Cannot cache the token because it is not immutable in the endpoint.
address lzToken = endpoint.lzToken();
if (lzToken == address(0)) revert LzTokenUnavailable();
// Pay LZ token fee by sending tokens to the endpoint.
IERC20(lzToken).safeTransferFrom(msg.sender, address(endpoint), _lzTokenFee);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { ILayerZeroEndpointV2 } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
/**
* @title IOAppCore
*/
interface IOAppCore {
// Custom error messages
error OnlyPeer(uint32 eid, bytes32 sender);
error NoPeer(uint32 eid);
error InvalidEndpointCall();
error InvalidDelegate();
// Event emitted when a peer (OApp) is set for a corresponding endpoint
event PeerSet(uint32 eid, bytes32 peer);
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol contract.
* @return receiverVersion The version of the OAppReceiver.sol contract.
*/
function oAppVersion() external view returns (uint64 senderVersion, uint64 receiverVersion);
/**
* @notice Retrieves the LayerZero endpoint associated with the OApp.
* @return iEndpoint The LayerZero endpoint as an interface.
*/
function endpoint() external view returns (ILayerZeroEndpointV2 iEndpoint);
/**
* @notice Retrieves the peer (OApp) associated with a corresponding endpoint.
* @param _eid The endpoint ID.
* @return peer The peer address (OApp instance) associated with the corresponding endpoint.
*/
function peers(uint32 _eid) external view returns (bytes32 peer);
/**
* @notice Sets the peer address (OApp instance) for a corresponding endpoint.
* @param _eid The endpoint ID.
* @param _peer The address of the peer to be associated with the corresponding endpoint.
*/
function setPeer(uint32 _eid, bytes32 _peer) external;
/**
* @notice Sets the delegate address for the OApp Core.
* @param _delegate The address of the delegate to be set.
*/
function setDelegate(address _delegate) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { MessagingReceipt, MessagingFee } from "../../oapp/OAppSender.sol";
/**
* @dev Struct representing token parameters for the OFT send() operation.
*/
struct SendParam {
uint32 dstEid; // Destination endpoint ID.
bytes32 to; // Recipient address.
uint256 amountLD; // Amount to send in local decimals.
uint256 minAmountLD; // Minimum amount to send in local decimals.
bytes extraOptions; // Additional options supplied by the caller to be used in the LayerZero message.
bytes composeMsg; // The composed message for the send() operation.
bytes oftCmd; // The OFT command to be executed, unused in default OFT implementations.
}
/**
* @dev Struct representing OFT limit information.
* @dev These amounts can change dynamically and are up the the specific oft implementation.
*/
struct OFTLimit {
uint256 minAmountLD; // Minimum amount in local decimals that can be sent to the recipient.
uint256 maxAmountLD; // Maximum amount in local decimals that can be sent to the recipient.
}
/**
* @dev Struct representing OFT receipt information.
*/
struct OFTReceipt {
uint256 amountSentLD; // Amount of tokens ACTUALLY debited from the sender in local decimals.
// @dev In non-default implementations, the amountReceivedLD COULD differ from this value.
uint256 amountReceivedLD; // Amount of tokens to be received on the remote side.
}
/**
* @dev Struct representing OFT fee details.
* @dev Future proof mechanism to provide a standardized way to communicate fees to things like a UI.
*/
struct OFTFeeDetail {
int256 feeAmountLD; // Amount of the fee in local decimals.
string description; // Description of the fee.
}
/**
* @title IOFT
* @dev Interface for the OftChain (OFT) token.
* @dev Does not inherit ERC20 to accommodate usage by OFTAdapter as well.
* @dev This specific interface ID is '0x02e49c2c'.
*/
interface IOFT {
// Custom error messages
error InvalidLocalDecimals();
error SlippageExceeded(uint256 amountLD, uint256 minAmountLD);
// Events
event OFTSent(
bytes32 indexed guid, // GUID of the OFT message.
uint32 dstEid, // Destination Endpoint ID.
address indexed fromAddress, // Address of the sender on the src chain.
uint256 amountSentLD, // Amount of tokens sent in local decimals.
uint256 amountReceivedLD // Amount of tokens received in local decimals.
);
event OFTReceived(
bytes32 indexed guid, // GUID of the OFT message.
uint32 srcEid, // Source Endpoint ID.
address indexed toAddress, // Address of the recipient on the dst chain.
uint256 amountReceivedLD // Amount of tokens received in local decimals.
);
/**
* @notice Retrieves interfaceID and the version of the OFT.
* @return interfaceId The interface ID.
* @return version The version.
*
* @dev interfaceId: This specific interface ID is '0x02e49c2c'.
* @dev version: Indicates a cross-chain compatible msg encoding with other OFTs.
* @dev If a new feature is added to the OFT cross-chain msg encoding, the version will be incremented.
* ie. localOFT version(x,1) CAN send messages to remoteOFT version(x,1)
*/
function oftVersion() external view returns (bytes4 interfaceId, uint64 version);
/**
* @notice Retrieves the address of the token associated with the OFT.
* @return token The address of the ERC20 token implementation.
*/
function token() external view returns (address);
/**
* @notice Indicates whether the OFT contract requires approval of the 'token()' to send.
* @return requiresApproval Needs approval of the underlying token implementation.
*
* @dev Allows things like wallet implementers to determine integration requirements,
* without understanding the underlying token implementation.
*/
function approvalRequired() external view returns (bool);
/**
* @notice Retrieves the shared decimals of the OFT.
* @return sharedDecimals The shared decimals of the OFT.
*/
function sharedDecimals() external view returns (uint8);
/**
* @notice Provides a quote for OFT-related operations.
* @param _sendParam The parameters for the send operation.
* @return limit The OFT limit information.
* @return oftFeeDetails The details of OFT fees.
* @return receipt The OFT receipt information.
*/
function quoteOFT(
SendParam calldata _sendParam
) external view returns (OFTLimit memory, OFTFeeDetail[] memory oftFeeDetails, OFTReceipt memory);
/**
* @notice Provides a quote for the send() operation.
* @param _sendParam The parameters for the send() operation.
* @param _payInLzToken Flag indicating whether the caller is paying in the LZ token.
* @return fee The calculated LayerZero messaging fee from the send() operation.
*
* @dev MessagingFee: LayerZero msg fee
* - nativeFee: The native fee.
* - lzTokenFee: The lzToken fee.
*/
function quoteSend(SendParam calldata _sendParam, bool _payInLzToken) external view returns (MessagingFee memory);
/**
* @notice Executes the send() operation.
* @param _sendParam The parameters for the send operation.
* @param _fee The fee information supplied by the caller.
* - nativeFee: The native fee.
* - lzTokenFee: The lzToken fee.
* @param _refundAddress The address to receive any excess funds from fees etc. on the src.
* @return receipt The LayerZero messaging receipt from the send() operation.
* @return oftReceipt The OFT receipt information.
*
* @dev MessagingReceipt: LayerZero msg receipt
* - guid: The unique identifier for the sent message.
* - nonce: The nonce of the sent message.
* - fee: The LayerZero fee incurred for the message.
*/
function send(
SendParam calldata _sendParam,
MessagingFee calldata _fee,
address _refundAddress
) external payable returns (MessagingReceipt memory, OFTReceipt memory);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
import { IMessageLibManager } from "./IMessageLibManager.sol";
import { IMessagingComposer } from "./IMessagingComposer.sol";
import { IMessagingChannel } from "./IMessagingChannel.sol";
import { IMessagingContext } from "./IMessagingContext.sol";
struct MessagingParams {
uint32 dstEid;
bytes32 receiver;
bytes message;
bytes options;
bool payInLzToken;
}
struct MessagingReceipt {
bytes32 guid;
uint64 nonce;
MessagingFee fee;
}
struct MessagingFee {
uint256 nativeFee;
uint256 lzTokenFee;
}
struct Origin {
uint32 srcEid;
bytes32 sender;
uint64 nonce;
}
enum ExecutionState {
NotExecutable,
Executable,
Executed
}
interface ILayerZeroEndpointV2 is IMessageLibManager, IMessagingComposer, IMessagingChannel, IMessagingContext {
event PacketSent(bytes encodedPayload, bytes options, address sendLibrary);
event PacketVerified(Origin origin, address receiver, bytes32 payloadHash);
event PacketDelivered(Origin origin, address receiver);
event LzReceiveAlert(
address indexed receiver,
address indexed executor,
Origin origin,
bytes32 guid,
uint256 gas,
uint256 value,
bytes message,
bytes extraData,
bytes reason
);
event LzTokenSet(address token);
function quote(MessagingParams calldata _params, address _sender) external view returns (MessagingFee memory);
function send(
MessagingParams calldata _params,
address _refundAddress
) external payable returns (MessagingReceipt memory);
function verify(Origin calldata _origin, address _receiver, bytes32 _payloadHash) external;
function verifiable(
Origin calldata _origin,
address _receiver,
address _receiveLib,
bytes32 _payloadHash
) external view returns (bool);
function executable(Origin calldata _origin, address _receiver) external view returns (ExecutionState);
function lzReceive(
Origin calldata _origin,
address _receiver,
bytes32 _guid,
bytes calldata _message,
bytes calldata _extraData
) external payable;
// oapp can burn messages partially by calling this function with its own business logic if messages are verified in order
function clear(address _oapp, Origin calldata _origin, bytes32 _guid, bytes calldata _message) external;
function setLzToken(address _lzToken) external;
function lzToken() external view returns (address);
function nativeToken() external view returns (address);
function setDelegate(address _delegate) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
struct SetConfigParam {
uint32 eid;
uint32 configType;
bytes config;
}
interface IMessageLibManager {
struct Timeout {
address lib;
uint256 expiry;
}
event LibraryRegistered(address newLib);
event DefaultSendLibrarySet(uint32 eid, address newLib);
event DefaultReceiveLibrarySet(uint32 eid, address oldLib, address newLib);
event DefaultReceiveLibraryTimeoutSet(uint32 eid, address oldLib, uint256 expiry);
event SendLibrarySet(address sender, uint32 eid, address newLib);
event ReceiveLibrarySet(address receiver, uint32 eid, address oldLib, address newLib);
event ReceiveLibraryTimeoutSet(address receiver, uint32 eid, address oldLib, uint256 timeout);
function registerLibrary(address _lib) external;
function isRegisteredLibrary(address _lib) external view returns (bool);
function getRegisteredLibraries() external view returns (address[] memory);
function setDefaultSendLibrary(uint32 _eid, address _newLib) external;
function defaultSendLibrary(uint32 _eid) external view returns (address);
function setDefaultReceiveLibrary(uint32 _eid, address _newLib, uint256 _timeout) external;
function defaultReceiveLibrary(uint32 _eid) external view returns (address);
function setDefaultReceiveLibraryTimeout(uint32 _eid, address _lib, uint256 _expiry) external;
function defaultReceiveLibraryTimeout(uint32 _eid) external view returns (address lib, uint256 expiry);
function isSupportedEid(uint32 _eid) external view returns (bool);
/// ------------------- OApp interfaces -------------------
function setSendLibrary(address _oapp, uint32 _eid, address _newLib) external;
function getSendLibrary(address _sender, uint32 _eid) external view returns (address lib);
function isDefaultSendLibrary(address _sender, uint32 _eid) external view returns (bool);
function setReceiveLibrary(address _oapp, uint32 _eid, address _newLib, uint256 _gracePeriod) external;
function getReceiveLibrary(address _receiver, uint32 _eid) external view returns (address lib, bool isDefault);
function setReceiveLibraryTimeout(address _oapp, uint32 _eid, address _lib, uint256 _gracePeriod) external;
function receiveLibraryTimeout(address _receiver, uint32 _eid) external view returns (address lib, uint256 expiry);
function setConfig(address _oapp, address _lib, SetConfigParam[] calldata _params) external;
function getConfig(
address _oapp,
address _lib,
uint32 _eid,
uint32 _configType
) external view returns (bytes memory config);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IMessagingChannel {
event InboundNonceSkipped(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce);
event PacketNilified(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
event PacketBurnt(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
function eid() external view returns (uint32);
// this is an emergency function if a message cannot be verified for some reasons
// required to provide _nextNonce to avoid race condition
function skip(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce) external;
function nilify(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;
function burn(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;
function nextGuid(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (bytes32);
function inboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);
function outboundNonce(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (uint64);
function inboundPayloadHash(
address _receiver,
uint32 _srcEid,
bytes32 _sender,
uint64 _nonce
) external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IMessagingComposer {
event ComposeSent(address from, address to, bytes32 guid, uint16 index, bytes message);
event ComposeDelivered(address from, address to, bytes32 guid, uint16 index);
event LzComposeAlert(
address indexed from,
address indexed to,
address indexed executor,
bytes32 guid,
uint16 index,
uint256 gas,
uint256 value,
bytes message,
bytes extraData,
bytes reason
);
function composeQueue(
address _from,
address _to,
bytes32 _guid,
uint16 _index
) external view returns (bytes32 messageHash);
function sendCompose(address _to, bytes32 _guid, uint16 _index, bytes calldata _message) external;
function lzCompose(
address _from,
address _to,
bytes32 _guid,
uint16 _index,
bytes calldata _message,
bytes calldata _extraData
) external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IMessagingContext {
function isSendingMessage() external view returns (bool);
function getSendContext() external view returns (uint32 dstEid, address sender);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*
* ==== Security Considerations
*
* There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
* expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
* considered as an intention to spend the allowance in any specific way. The second is that because permits have
* built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
* take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
* generally recommended is:
*
* ```solidity
* function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
* try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
* doThing(..., value);
* }
*
* function doThing(..., uint256 value) public {
* token.safeTransferFrom(msg.sender, address(this), value);
* ...
* }
* ```
*
* Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
* `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
* {SafeERC20-safeTransferFrom}).
*
* Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
* contracts should have entry points that don't rely on permit.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*
* CAUTION: See Security Considerations above.
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
* to be set to zero before setting it to a non-zero value, such as USDT.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
* Revert on invalid signature.
*/
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return
success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
function _contextSuffixLength() internal view virtual returns (uint256) {
return 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.
pragma solidity ^0.8.0;
/**
* @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*
* Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
* all math on `uint256` and `int256` and then downcasting.
*/
library SafeCast {
/**
* @dev Returns the downcasted uint248 from uint256, reverting on
* overflow (when the input is greater than largest uint248).
*
* Counterpart to Solidity's `uint248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*
* _Available since v4.7._
*/
function toUint248(uint256 value) internal pure returns (uint248) {
require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
return uint248(value);
}
/**
* @dev Returns the downcasted uint240 from uint256, reverting on
* overflow (when the input is greater than largest uint240).
*
* Counterpart to Solidity's `uint240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*
* _Available since v4.7._
*/
function toUint240(uint256 value) internal pure returns (uint240) {
require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
return uint240(value);
}
/**
* @dev Returns the downcasted uint232 from uint256, reverting on
* overflow (when the input is greater than largest uint232).
*
* Counterpart to Solidity's `uint232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*
* _Available since v4.7._
*/
function toUint232(uint256 value) internal pure returns (uint232) {
require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
return uint232(value);
}
/**
* @dev Returns the downcasted uint224 from uint256, reverting on
* overflow (when the input is greater than largest uint224).
*
* Counterpart to Solidity's `uint224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*
* _Available since v4.2._
*/
function toUint224(uint256 value) internal pure returns (uint224) {
require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
return uint224(value);
}
/**
* @dev Returns the downcasted uint216 from uint256, reverting on
* overflow (when the input is greater than largest uint216).
*
* Counterpart to Solidity's `uint216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*
* _Available since v4.7._
*/
function toUint216(uint256 value) internal pure returns (uint216) {
require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
return uint216(value);
}
/**
* @dev Returns the downcasted uint208 from uint256, reverting on
* overflow (when the input is greater than largest uint208).
*
* Counterpart to Solidity's `uint208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*
* _Available since v4.7._
*/
function toUint208(uint256 value) internal pure returns (uint208) {
require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
return uint208(value);
}
/**
* @dev Returns the downcasted uint200 from uint256, reverting on
* overflow (when the input is greater than largest uint200).
*
* Counterpart to Solidity's `uint200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*
* _Available since v4.7._
*/
function toUint200(uint256 value) internal pure returns (uint200) {
require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
return uint200(value);
}
/**
* @dev Returns the downcasted uint192 from uint256, reverting on
* overflow (when the input is greater than largest uint192).
*
* Counterpart to Solidity's `uint192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*
* _Available since v4.7._
*/
function toUint192(uint256 value) internal pure returns (uint192) {
require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
return uint192(value);
}
/**
* @dev Returns the downcasted uint184 from uint256, reverting on
* overflow (when the input is greater than largest uint184).
*
* Counterpart to Solidity's `uint184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*
* _Available since v4.7._
*/
function toUint184(uint256 value) internal pure returns (uint184) {
require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
return uint184(value);
}
/**
* @dev Returns the downcasted uint176 from uint256, reverting on
* overflow (when the input is greater than largest uint176).
*
* Counterpart to Solidity's `uint176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*
* _Available since v4.7._
*/
function toUint176(uint256 value) internal pure returns (uint176) {
require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
return uint176(value);
}
/**
* @dev Returns the downcasted uint168 from uint256, reverting on
* overflow (when the input is greater than largest uint168).
*
* Counterpart to Solidity's `uint168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*
* _Available since v4.7._
*/
function toUint168(uint256 value) internal pure returns (uint168) {
require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
return uint168(value);
}
/**
* @dev Returns the downcasted uint160 from uint256, reverting on
* overflow (when the input is greater than largest uint160).
*
* Counterpart to Solidity's `uint160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*
* _Available since v4.7._
*/
function toUint160(uint256 value) internal pure returns (uint160) {
require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
return uint160(value);
}
/**
* @dev Returns the downcasted uint152 from uint256, reverting on
* overflow (when the input is greater than largest uint152).
*
* Counterpart to Solidity's `uint152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*
* _Available since v4.7._
*/
function toUint152(uint256 value) internal pure returns (uint152) {
require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
return uint152(value);
}
/**
* @dev Returns the downcasted uint144 from uint256, reverting on
* overflow (when the input is greater than largest uint144).
*
* Counterpart to Solidity's `uint144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*
* _Available since v4.7._
*/
function toUint144(uint256 value) internal pure returns (uint144) {
require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
return uint144(value);
}
/**
* @dev Returns the downcasted uint136 from uint256, reverting on
* overflow (when the input is greater than largest uint136).
*
* Counterpart to Solidity's `uint136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*
* _Available since v4.7._
*/
function toUint136(uint256 value) internal pure returns (uint136) {
require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
return uint136(value);
}
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v2.5._
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint120 from uint256, reverting on
* overflow (when the input is greater than largest uint120).
*
* Counterpart to Solidity's `uint120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*
* _Available since v4.7._
*/
function toUint120(uint256 value) internal pure returns (uint120) {
require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
return uint120(value);
}
/**
* @dev Returns the downcasted uint112 from uint256, reverting on
* overflow (when the input is greater than largest uint112).
*
* Counterpart to Solidity's `uint112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*
* _Available since v4.7._
*/
function toUint112(uint256 value) internal pure returns (uint112) {
require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
return uint112(value);
}
/**
* @dev Returns the downcasted uint104 from uint256, reverting on
* overflow (when the input is greater than largest uint104).
*
* Counterpart to Solidity's `uint104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*
* _Available since v4.7._
*/
function toUint104(uint256 value) internal pure returns (uint104) {
require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
return uint104(value);
}
/**
* @dev Returns the downcasted uint96 from uint256, reverting on
* overflow (when the input is greater than largest uint96).
*
* Counterpart to Solidity's `uint96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*
* _Available since v4.2._
*/
function toUint96(uint256 value) internal pure returns (uint96) {
require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
return uint96(value);
}
/**
* @dev Returns the downcasted uint88 from uint256, reverting on
* overflow (when the input is greater than largest uint88).
*
* Counterpart to Solidity's `uint88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*
* _Available since v4.7._
*/
function toUint88(uint256 value) internal pure returns (uint88) {
require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
return uint88(value);
}
/**
* @dev Returns the downcasted uint80 from uint256, reverting on
* overflow (when the input is greater than largest uint80).
*
* Counterpart to Solidity's `uint80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*
* _Available since v4.7._
*/
function toUint80(uint256 value) internal pure returns (uint80) {
require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
return uint80(value);
}
/**
* @dev Returns the downcasted uint72 from uint256, reverting on
* overflow (when the input is greater than largest uint72).
*
* Counterpart to Solidity's `uint72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*
* _Available since v4.7._
*/
function toUint72(uint256 value) internal pure returns (uint72) {
require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
return uint72(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v2.5._
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint56 from uint256, reverting on
* overflow (when the input is greater than largest uint56).
*
* Counterpart to Solidity's `uint56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*
* _Available since v4.7._
*/
function toUint56(uint256 value) internal pure returns (uint56) {
require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
return uint56(value);
}
/**
* @dev Returns the downcasted uint48 from uint256, reverting on
* overflow (when the input is greater than largest uint48).
*
* Counterpart to Solidity's `uint48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*
* _Available since v4.7._
*/
function toUint48(uint256 value) internal pure returns (uint48) {
require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
return uint48(value);
}
/**
* @dev Returns the downcasted uint40 from uint256, reverting on
* overflow (when the input is greater than largest uint40).
*
* Counterpart to Solidity's `uint40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*
* _Available since v4.7._
*/
function toUint40(uint256 value) internal pure returns (uint40) {
require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
return uint40(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v2.5._
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint24 from uint256, reverting on
* overflow (when the input is greater than largest uint24).
*
* Counterpart to Solidity's `uint24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*
* _Available since v4.7._
*/
function toUint24(uint256 value) internal pure returns (uint24) {
require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
return uint24(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v2.5._
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*
* _Available since v2.5._
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*
* _Available since v3.0._
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
/**
* @dev Returns the downcasted int248 from int256, reverting on
* overflow (when the input is less than smallest int248 or
* greater than largest int248).
*
* Counterpart to Solidity's `int248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*
* _Available since v4.7._
*/
function toInt248(int256 value) internal pure returns (int248 downcasted) {
downcasted = int248(value);
require(downcasted == value, "SafeCast: value doesn't fit in 248 bits");
}
/**
* @dev Returns the downcasted int240 from int256, reverting on
* overflow (when the input is less than smallest int240 or
* greater than largest int240).
*
* Counterpart to Solidity's `int240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*
* _Available since v4.7._
*/
function toInt240(int256 value) internal pure returns (int240 downcasted) {
downcasted = int240(value);
require(downcasted == value, "SafeCast: value doesn't fit in 240 bits");
}
/**
* @dev Returns the downcasted int232 from int256, reverting on
* overflow (when the input is less than smallest int232 or
* greater than largest int232).
*
* Counterpart to Solidity's `int232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*
* _Available since v4.7._
*/
function toInt232(int256 value) internal pure returns (int232 downcasted) {
downcasted = int232(value);
require(downcasted == value, "SafeCast: value doesn't fit in 232 bits");
}
/**
* @dev Returns the downcasted int224 from int256, reverting on
* overflow (when the input is less than smallest int224 or
* greater than largest int224).
*
* Counterpart to Solidity's `int224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*
* _Available since v4.7._
*/
function toInt224(int256 value) internal pure returns (int224 downcasted) {
downcasted = int224(value);
require(downcasted == value, "SafeCast: value doesn't fit in 224 bits");
}
/**
* @dev Returns the downcasted int216 from int256, reverting on
* overflow (when the input is less than smallest int216 or
* greater than largest int216).
*
* Counterpart to Solidity's `int216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*
* _Available since v4.7._
*/
function toInt216(int256 value) internal pure returns (int216 downcasted) {
downcasted = int216(value);
require(downcasted == value, "SafeCast: value doesn't fit in 216 bits");
}
/**
* @dev Returns the downcasted int208 from int256, reverting on
* overflow (when the input is less than smallest int208 or
* greater than largest int208).
*
* Counterpart to Solidity's `int208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*
* _Available since v4.7._
*/
function toInt208(int256 value) internal pure returns (int208 downcasted) {
downcasted = int208(value);
require(downcasted == value, "SafeCast: value doesn't fit in 208 bits");
}
/**
* @dev Returns the downcasted int200 from int256, reverting on
* overflow (when the input is less than smallest int200 or
* greater than largest int200).
*
* Counterpart to Solidity's `int200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*
* _Available since v4.7._
*/
function toInt200(int256 value) internal pure returns (int200 downcasted) {
downcasted = int200(value);
require(downcasted == value, "SafeCast: value doesn't fit in 200 bits");
}
/**
* @dev Returns the downcasted int192 from int256, reverting on
* overflow (when the input is less than smallest int192 or
* greater than largest int192).
*
* Counterpart to Solidity's `int192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*
* _Available since v4.7._
*/
function toInt192(int256 value) internal pure returns (int192 downcasted) {
downcasted = int192(value);
require(downcasted == value, "SafeCast: value doesn't fit in 192 bits");
}
/**
* @dev Returns the downcasted int184 from int256, reverting on
* overflow (when the input is less than smallest int184 or
* greater than largest int184).
*
* Counterpart to Solidity's `int184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*
* _Available since v4.7._
*/
function toInt184(int256 value) internal pure returns (int184 downcasted) {
downcasted = int184(value);
require(downcasted == value, "SafeCast: value doesn't fit in 184 bits");
}
/**
* @dev Returns the downcasted int176 from int256, reverting on
* overflow (when the input is less than smallest int176 or
* greater than largest int176).
*
* Counterpart to Solidity's `int176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*
* _Available since v4.7._
*/
function toInt176(int256 value) internal pure returns (int176 downcasted) {
downcasted = int176(value);
require(downcasted == value, "SafeCast: value doesn't fit in 176 bits");
}
/**
* @dev Returns the downcasted int168 from int256, reverting on
* overflow (when the input is less than smallest int168 or
* greater than largest int168).
*
* Counterpart to Solidity's `int168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*
* _Available since v4.7._
*/
function toInt168(int256 value) internal pure returns (int168 downcasted) {
downcasted = int168(value);
require(downcasted == value, "SafeCast: value doesn't fit in 168 bits");
}
/**
* @dev Returns the downcasted int160 from int256, reverting on
* overflow (when the input is less than smallest int160 or
* greater than largest int160).
*
* Counterpart to Solidity's `int160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*
* _Available since v4.7._
*/
function toInt160(int256 value) internal pure returns (int160 downcasted) {
downcasted = int160(value);
require(downcasted == value, "SafeCast: value doesn't fit in 160 bits");
}
/**
* @dev Returns the downcasted int152 from int256, reverting on
* overflow (when the input is less than smallest int152 or
* greater than largest int152).
*
* Counterpart to Solidity's `int152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*
* _Available since v4.7._
*/
function toInt152(int256 value) internal pure returns (int152 downcasted) {
downcasted = int152(value);
require(downcasted == value, "SafeCast: value doesn't fit in 152 bits");
}
/**
* @dev Returns the downcasted int144 from int256, reverting on
* overflow (when the input is less than smallest int144 or
* greater than largest int144).
*
* Counterpart to Solidity's `int144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*
* _Available since v4.7._
*/
function toInt144(int256 value) internal pure returns (int144 downcasted) {
downcasted = int144(value);
require(downcasted == value, "SafeCast: value doesn't fit in 144 bits");
}
/**
* @dev Returns the downcasted int136 from int256, reverting on
* overflow (when the input is less than smallest int136 or
* greater than largest int136).
*
* Counterpart to Solidity's `int136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*
* _Available since v4.7._
*/
function toInt136(int256 value) internal pure returns (int136 downcasted) {
downcasted = int136(value);
require(downcasted == value, "SafeCast: value doesn't fit in 136 bits");
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v3.1._
*/
function toInt128(int256 value) internal pure returns (int128 downcasted) {
downcasted = int128(value);
require(downcasted == value, "SafeCast: value doesn't fit in 128 bits");
}
/**
* @dev Returns the downcasted int120 from int256, reverting on
* overflow (when the input is less than smallest int120 or
* greater than largest int120).
*
* Counterpart to Solidity's `int120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*
* _Available since v4.7._
*/
function toInt120(int256 value) internal pure returns (int120 downcasted) {
downcasted = int120(value);
require(downcasted == value, "SafeCast: value doesn't fit in 120 bits");
}
/**
* @dev Returns the downcasted int112 from int256, reverting on
* overflow (when the input is less than smallest int112 or
* greater than largest int112).
*
* Counterpart to Solidity's `int112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*
* _Available since v4.7._
*/
function toInt112(int256 value) internal pure returns (int112 downcasted) {
downcasted = int112(value);
require(downcasted == value, "SafeCast: value doesn't fit in 112 bits");
}
/**
* @dev Returns the downcasted int104 from int256, reverting on
* overflow (when the input is less than smallest int104 or
* greater than largest int104).
*
* Counterpart to Solidity's `int104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*
* _Available since v4.7._
*/
function toInt104(int256 value) internal pure returns (int104 downcasted) {
downcasted = int104(value);
require(downcasted == value, "SafeCast: value doesn't fit in 104 bits");
}
/**
* @dev Returns the downcasted int96 from int256, reverting on
* overflow (when the input is less than smallest int96 or
* greater than largest int96).
*
* Counterpart to Solidity's `int96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*
* _Available since v4.7._
*/
function toInt96(int256 value) internal pure returns (int96 downcasted) {
downcasted = int96(value);
require(downcasted == value, "SafeCast: value doesn't fit in 96 bits");
}
/**
* @dev Returns the downcasted int88 from int256, reverting on
* overflow (when the input is less than smallest int88 or
* greater than largest int88).
*
* Counterpart to Solidity's `int88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*
* _Available since v4.7._
*/
function toInt88(int256 value) internal pure returns (int88 downcasted) {
downcasted = int88(value);
require(downcasted == value, "SafeCast: value doesn't fit in 88 bits");
}
/**
* @dev Returns the downcasted int80 from int256, reverting on
* overflow (when the input is less than smallest int80 or
* greater than largest int80).
*
* Counterpart to Solidity's `int80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*
* _Available since v4.7._
*/
function toInt80(int256 value) internal pure returns (int80 downcasted) {
downcasted = int80(value);
require(downcasted == value, "SafeCast: value doesn't fit in 80 bits");
}
/**
* @dev Returns the downcasted int72 from int256, reverting on
* overflow (when the input is less than smallest int72 or
* greater than largest int72).
*
* Counterpart to Solidity's `int72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*
* _Available since v4.7._
*/
function toInt72(int256 value) internal pure returns (int72 downcasted) {
downcasted = int72(value);
require(downcasted == value, "SafeCast: value doesn't fit in 72 bits");
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v3.1._
*/
function toInt64(int256 value) internal pure returns (int64 downcasted) {
downcasted = int64(value);
require(downcasted == value, "SafeCast: value doesn't fit in 64 bits");
}
/**
* @dev Returns the downcasted int56 from int256, reverting on
* overflow (when the input is less than smallest int56 or
* greater than largest int56).
*
* Counterpart to Solidity's `int56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*
* _Available since v4.7._
*/
function toInt56(int256 value) internal pure returns (int56 downcasted) {
downcasted = int56(value);
require(downcasted == value, "SafeCast: value doesn't fit in 56 bits");
}
/**
* @dev Returns the downcasted int48 from int256, reverting on
* overflow (when the input is less than smallest int48 or
* greater than largest int48).
*
* Counterpart to Solidity's `int48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*
* _Available since v4.7._
*/
function toInt48(int256 value) internal pure returns (int48 downcasted) {
downcasted = int48(value);
require(downcasted == value, "SafeCast: value doesn't fit in 48 bits");
}
/**
* @dev Returns the downcasted int40 from int256, reverting on
* overflow (when the input is less than smallest int40 or
* greater than largest int40).
*
* Counterpart to Solidity's `int40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*
* _Available since v4.7._
*/
function toInt40(int256 value) internal pure returns (int40 downcasted) {
downcasted = int40(value);
require(downcasted == value, "SafeCast: value doesn't fit in 40 bits");
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v3.1._
*/
function toInt32(int256 value) internal pure returns (int32 downcasted) {
downcasted = int32(value);
require(downcasted == value, "SafeCast: value doesn't fit in 32 bits");
}
/**
* @dev Returns the downcasted int24 from int256, reverting on
* overflow (when the input is less than smallest int24 or
* greater than largest int24).
*
* Counterpart to Solidity's `int24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*
* _Available since v4.7._
*/
function toInt24(int256 value) internal pure returns (int24 downcasted) {
downcasted = int24(value);
require(downcasted == value, "SafeCast: value doesn't fit in 24 bits");
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v3.1._
*/
function toInt16(int256 value) internal pure returns (int16 downcasted) {
downcasted = int16(value);
require(downcasted == value, "SafeCast: value doesn't fit in 16 bits");
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*
* _Available since v3.1._
*/
function toInt8(int256 value) internal pure returns (int8 downcasted) {
downcasted = int8(value);
require(downcasted == value, "SafeCast: value doesn't fit in 8 bits");
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*
* _Available since v3.0._
*/
function toInt256(uint256 value) internal pure returns (int256) {
// Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.22;
import { SafeCast } from "@openzeppelin/contracts/utils/math/SafeCast.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IStargate, StargateType } from "../interfaces/IStargate.sol";
import { IStargateFeeLib, FeeParams } from "../interfaces/IStargateFeeLib.sol";
/// @dev A configuration that defines 3 zones for calculating fees. The zones are separated by upper bounds.
/// @dev Depending on the amount transferred, one of these three different rates is applied.
/// @dev The rate is stored as parts per million and signifies fee, no fee or reward.
/// @dev The amount given to the contract is considered the inflow. The outflow is then calculated; which is
/// @dev how many tokens the sender will receive on the destination chain. If outflow < inflow, then a fee is charged.
/// @dev If outflow == inflow there is no fee. If outflow > inflow, it means there is a reward.
/// @dev This translates to:
/// @dev rate < FEE_DENOMINATOR -> fee
/// @dev rate == FEE_DENOMINATOR -> no fee
/// @dev rate > FEE_DENOMINATOR -> reward
/// @dev A paused flag is included to pause the fee calculation for a destination.
struct FeeConfig {
bool paused;
uint64 zone1UpperBound;
uint64 zone2UpperBound;
uint24 zone1FeeMillionth; // in millionth (1/1_000_000)
uint24 zone2FeeMillionth;
uint24 zone3FeeMillionth;
uint24 rewardMillionth;
}
/// @title FeeLibV1
/// @notice An implementation of IStargateFeeLib used to calculate fees for Stargate transfers.
contract FeeLibV1 is Ownable, IStargateFeeLib {
using SafeCast for uint256;
address public immutable stargate;
StargateType public immutable stargateType;
uint256 internal constant FEE_DENOMINATOR = 1_000_000;
mapping(uint32 eid => FeeConfig config) public feeConfigs;
error FeeLib_InvalidFeeConfiguration();
error FeeLib_Paused();
error FeeLib_Unauthorized();
event FeeConfigSet(uint32 eid, FeeConfig config);
event PausedSet(uint32 eid, bool isPaused);
modifier onlyStargate() {
if (msg.sender != stargate) revert FeeLib_Unauthorized();
_;
}
constructor(address _stargate) {
stargate = _stargate;
stargateType = IStargate(_stargate).stargateType();
}
/// @notice Set the new configuration for a destination.
/// @param _dstEid The destination endpoint ID
/// @param _zone1UpperBound The upper bound for the first zone
/// @param _zone2UpperBound The upper bound for the second zone
/// @param _zone1FeeMillionth The fee for the first zone in millionth
/// @param _zone2FeeMillionth The fee for the second zone in millionth
/// @param _zone3FeeMillionth The fee for the third zone in millionth
/// @param _rewardMillionth The reward in millionth
function setFeeConfig(
uint32 _dstEid,
uint64 _zone1UpperBound,
uint64 _zone2UpperBound,
uint24 _zone1FeeMillionth,
uint24 _zone2FeeMillionth,
uint24 _zone3FeeMillionth,
uint24 _rewardMillionth
) external onlyOwner {
if (
_zone1FeeMillionth > FEE_DENOMINATOR || // fee maxes at 100% (reward could be > %100)
_zone2FeeMillionth > FEE_DENOMINATOR ||
_zone3FeeMillionth > FEE_DENOMINATOR ||
_zone2UpperBound < _zone1UpperBound // zone2UpperBound must be >= than zone1UpperBound
) revert FeeLib_InvalidFeeConfiguration();
/// @dev config.paused persists from the original setting
FeeConfig storage config = feeConfigs[_dstEid];
config.zone1UpperBound = _zone1UpperBound;
config.zone2UpperBound = _zone2UpperBound;
config.zone1FeeMillionth = _zone1FeeMillionth;
config.zone2FeeMillionth = _zone2FeeMillionth;
config.zone3FeeMillionth = _zone3FeeMillionth;
config.rewardMillionth = _rewardMillionth;
emit FeeConfigSet(_dstEid, config);
}
/// @notice Pause fee calculation for a destination.
/// @param _dstEid The destination LayerZero endpoint ID
/// @param _isPaused A flag indicating whether or not the destination is paused.
function setPaused(uint32 _dstEid, bool _isPaused) external onlyOwner {
feeConfigs[_dstEid].paused = _isPaused;
emit PausedSet(_dstEid, _isPaused);
}
/// @dev Included to future proof the API to allow for fees to modify state.
/// @dev In the case of the FeeLibV1 implementation, state is not modified.
function applyFee(FeeParams calldata _params) public view override onlyStargate returns (uint64 amountOutSD) {
return applyFeeView(_params);
}
/// @notice Apply fee to the request parameters and calculate the expected output amount on the destination chain
/// @dev Reverts with Paused if the path is paused.
/// @param _params The transfer information, namely the amount and destination
/// @return amountOutSD The number of tokens the sender will receive on the destination chain, in shared decimals.
function applyFeeView(FeeParams calldata _params) public view override returns (uint64 amountOutSD) {
FeeConfig storage config = feeConfigs[_params.dstEid];
if (config.paused) revert FeeLib_Paused();
uint64 amountInSD = _params.amountInSD;
uint64 deficitSD = _params.deficitSD;
uint24 rewardMillionth = config.rewardMillionth;
if (stargateType == StargateType.OFT || deficitSD == 0 || rewardMillionth == 0) {
// if the stargate is OFT or there is no deficit, apply fee to the whole amount
amountOutSD = amountInSD - _calculateFee(config, amountInSD);
} else if (amountInSD <= deficitSD) {
// if the amount is less than the deficit, apply reward to the whole amount
amountOutSD = amountInSD + _calculateReward(rewardMillionth, amountInSD);
} else {
// if the amount is more than the deficit, apply reward to the deficit and fee to the rest
amountOutSD =
amountInSD +
_calculateReward(rewardMillionth, deficitSD) -
_calculateFee(config, amountInSD - deficitSD);
}
}
function _calculateFee(FeeConfig storage _config, uint64 _amountSD) internal view returns (uint64 fee) {
uint256 feeMill = _amountSD <= _config.zone1UpperBound
? _config.zone1FeeMillionth
: _amountSD <= _config.zone2UpperBound
? _config.zone2FeeMillionth
: _config.zone3FeeMillionth;
// if feeMill is non-zero and _amountSD is non-zero, then levy the fee
if (feeMill > 0 && _amountSD > 0) {
// converts intermediate operands to use uint256 containers
// as after dividing by FEE_DENOMINATOR, the result may fit in a uint64
//
// adds one to ensure fee is always rounded up
fee = SafeCast.toUint64((uint256(_amountSD) * feeMill) / FEE_DENOMINATOR + 1);
}
}
function _calculateReward(uint24 _rewardMillionth, uint64 _amountSD) internal pure returns (uint64 reward) {
// converts intermediate operands to use uint256 containers
// as after dividing by FEE_DENOMINATOR, the result may fit in a uint64
reward = SafeCast.toUint64((uint256(_amountSD) * _rewardMillionth) / FEE_DENOMINATOR);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
// Solidity does not support splitting import across multiple lines
// solhint-disable-next-line max-line-length
import { IOFT, SendParam, MessagingFee, MessagingReceipt, OFTReceipt } from "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/interfaces/IOFT.sol";
/// @notice Stargate implementation type.
enum StargateType {
Pool,
OFT
}
/// @notice Ticket data for bus ride.
struct Ticket {
uint72 ticketId;
bytes passengerBytes;
}
/// @title Interface for Stargate.
/// @notice Defines an API for sending tokens to destination chains.
interface IStargate is IOFT {
/// @dev This function is same as `send` in OFT interface but returns the ticket data if in the bus ride mode,
/// which allows the caller to ride and drive the bus in the same transaction.
function sendToken(
SendParam calldata _sendParam,
MessagingFee calldata _fee,
address _refundAddress
) external payable returns (MessagingReceipt memory msgReceipt, OFTReceipt memory oftReceipt, Ticket memory ticket);
/// @notice Returns the Stargate implementation type.
function stargateType() external pure returns (StargateType);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/// @notice Parameters used to assess fees to send tokens to a destination endpoint.
struct FeeParams {
address sender;
uint32 dstEid;
uint64 amountInSD;
uint64 deficitSD;
bool toOFT;
bool isTaxi;
}
/// @title Interface for assessing fees to send tokens to a destination endpoint.
interface IStargateFeeLib {
/// @notice Apply a fee for a given request, allowing for state modification.
/// @dev This is included for future proofing potential implementations
/// @dev where state is modified in the feeLib based on a FeeParams
function applyFee(FeeParams calldata _params) external returns (uint64 amountOutSD);
/// @notice Apply a fee for a given request, without modifying state.
function applyFeeView(FeeParams calldata _params) external view returns (uint64 amountOutSD);
}